Difference between revisions of "Template:Announcements"

Revision as of 11:15, 1 May 2024

MA6 TSA is down - Update

Still waiting on a quote and lead time for the board we need for the TSA microscope issue, was supposed to have that info yesterday. I've just pinged them and will provide everyone with an update once I have something.

//Vraj Mehalana 11:15, 1 May 2024 (PDT)

Velion FIB Tool DOWN

Raith service are installing and aligning a new GaBiLi source. The Velion FIB column is not available to users until further notice.

//Vraj Mehalana 10:58, 30 April 2024 (PDT)

Stepper #3 (ASML DUV) - PM Moved to 5/6 – 5/10

We are postponing the Maintenance date to May 6th – 10th. On the week of May 6th, ASML Engineers will be performing preventative maintenance, please plan your work around the tool being down at that time.

//Vraj Mehalana 09:42, 5 April 2024 (PDT)

ICP1 Down

The board we were waiting on arrived, but it did not resolve the tool issue. We are working with Panasonic on the next steps. //Vraj Mehalana 14:17, 1 March 2024 (PST)

Lab Access Changes: Symmetry App

Card/Iris scanner access is still currently enabled. However we will be moving to a smartphone-based access system. IMPORTANT: check your email to setup the new smartphone access system, so you will be ready when we switch to the new system. Look for an email titled "Invitation to Access Symmetry App". // John d 13:49, 7 November 2023 (PST)

Wafer Bonder, (Suss SB6-8E)

SUSS aims to be on site in early February. We’ll will send out an email once I get confirmation for a specific date. //Vraj Mehalana 14:23, 13 December 2023 (PST)

@@ Line 1: / Line 1: @@
 <startfeed />
+=====MA6 TSA is down - Update=====
-None
+Still waiting on a quote and lead time for the board we need for the TSA microscope issue, was supposed to have that info yesterday. I've just pinged them and will provide everyone with an update once I have something.
-=====Filmetrics F50: UP=====
-The F50-WaferMapper’s laptop has been Replaced.
-// [[User:Mehalana v|Vraj Mehalana]] 16:53, 22 March 2023 (PDT)
+//[[User:Mehalana v|Vraj Mehalana]] 11:15, 1 May 2024 (PDT)
+=====Velion FIB Tool DOWN=====
+Raith service are installing and aligning a new GaBiLi source. The Velion FIB column is not available to users until further notice.
+//[[User:Mehalana v|Vraj Mehalana]] 10:58, 30 April 2024 (PDT)
+=====Stepper #3 (ASML DUV) - PM Moved to 5/6 – 5/10=====
+We are postponing the Maintenance date to May 6th – 10th.
+On the week of May 6th, ASML Engineers will be performing preventative maintenance, please plan your work around the tool being down at that time.
+//[[User:Mehalana v|Vraj Mehalana]] 09:42, 5 April 2024 (PDT)
+=====ICP1 Down=====
+The board we were waiting on arrived, but it did not resolve the tool issue. We are working with Panasonic on the next steps.
+//[[User:Mehalana v|Vraj Mehalana]] 14:17, 1 March 2024 (PST)
+=====Lab Access Changes: Symmetry App=====
+Card/Iris scanner access is still currently enabled.  However we will be moving to a smartphone-based access system.  '''IMPORTANT''': check your email to setup the new smartphone access system, so you will be ready when we switch to the new system. Look for an email titled '''''"Invitation to Access Symmetry App"'''''.
+// [[User:John d|John d]] 13:49, 7 November 2023 (PST)
+=====Wafer Bonder, (Suss SB6-8E)=====
+SUSS aims to be on site in early February.  We’ll will send out an email once I get confirmation for a specific date.
+//[[User:Mehalana v|Vraj Mehalana]] 14:23, 13 December 2023 (PST)
-=====FEI SEM#1 Replacement Project=====
-The FEI SEM #1 will be removed and replaced starting Friday March 17th. Both SEMs will be shut down and the SEM room will be off limits beginning at 8 am Friday and return to normal operations Tuesday morning the 21st.
-//[[User:Mehalana v|Vraj Mehalana]] 10:55, 16 March 2023 (PDT)
-<!--feedBurner name="UCSBNanofab-Announcements" /-->
-<!-- Description of the RSS feed -->
 <!--
 SEE THE BOTTOM OF THIS PAGE FOR DETAILED INSTRUCTIONS ON ADDING NEWS ITEMS.
@@ Line 16: / Line 33: @@
 >> Use two slashes // and FOUR tilde's to insert your signature at the end of your post: //~~~~
 -->
-<!---------------------------------------------->
-<!------------- Equipment Status ---------------->
-===== Unaxis Etch: Down =====
-We had to take the VAT controller off of this module to get the ICP-PECVD running. I have no immediate ETA for this system coming back online. Until we get this system running again you will need to use the Oxford Cobra system. -- Tony
-// [[User:John d|John d]] 09:35, 13 February 2023 (PST)
-===== Dektak XT ready for training =====
-We have replaced the Dektak 6M with a new Dektak XT profilometer. The system is available for training, please [[Aidan_Hopkins|contact the tool supervisor]].
-// [[User:John d|John d]] 10:08, 7 February 2023 (PST)
-===== Au Plating: UP=====
-only the full 100mm wafer fixture is available at the moment. You can plate smaller pieces on it with no issues.
-// [[User:Mehalana v|Vraj Mehalana]] 12:35, 15 March 2023 (PDT)
-<!---------- end of Equipment Status ------------>
 <!---------DO NOT EDIT BELOW THIS LINE----------->
 <endfeed />
@@ Line 37: / Line 38: @@
 <!--------------------------------------------
 ====== HOW TO ADD ITEMS ======
 * You can copy/paste the example below for a new news item.
 * Use level 5 heading for each item (5 equal signs surrounding the title) - they will show up as separate RSS items this way.  (This looks best on the Wiki homepage)