Difference between revisions of "Template:Announcements"

Revision as of 10:26, 25 March 2024

Stepper #3 (ASML DUV) - Down for PM on April 15th-19th

ASML Engineers will be on-site to perform the Annual Periodic Maintenance on the tool from Monday April 15th through April 19th. The tool will be unavailable for use during this time.

Please plan your work accordingly.

//Vraj Mehalana 10:26, 25 March 2024 (PDT)

ALD Oxford UP

All three chambers are operating properly. //Vraj Mehalana 13:48, 19 March 2024 (PDT)

DI and Waste Water systems

DI and Waste Water systems will be down for upgrade April 5th and 6th. //Vraj Mehalana 11:55, 18 March 2024 (PDT)

ICP1 Down

The board we were waiting on arrived, but it did not resolve the tool issue. We are working with Panasonic on the next steps. //Vraj Mehalana 14:17, 1 March 2024 (PST)

Job Opening: Process Engineer

The Nanofab has a current job opening for a Process/Wafer-Fab Engineer, see the NanoFab Job Openings page for details.

//Demis D. John 14:52, 30 October 2023 (PDT)

Lab Access Changes: Symmetry App

Card/Iris scanner access is still currently enabled. However we will be moving to a smartphone-based access system. IMPORTANT: check your email to setup the new smartphone access system, so you will be ready when we switch to the new system. Look for an email titled "Invitation to Access Symmetry App". // John d 13:49, 7 November 2023 (PST)

Wafer Bonder, (Suss SB6-8E)

SUSS aims to be on site in early February. We’ll will send out an email once I get confirmation for a specific date. //Vraj Mehalana 14:23, 13 December 2023 (PST)

@@ Line 1: / Line 1: @@
 <startfeed />
+=====Stepper #3 (ASML DUV) - Down for PM on April 15th-19th=====
-<!--feedBurner name="UCSBNanofab-Announcements" /-->
+ASML Engineers will be on-site to perform the Annual Periodic Maintenance on the tool from
-<!-- Description of the RSS feed -->
+Monday April 15th through April 19th.  The tool will be unavailable for use during this time.
-'''''Important Announcements'''''
-----
-<!--
-SEE THE BOTTOM OF THIS PAGE FOR DETAILED INSTRUCTIONS ON ADDING NEWS ITEMS.
+Please plan your work accordingly.
-In order for your post to show up correctly, you need to:
->> Use FIVE equal-signs for the Title's heading level.  eg.: ===== my post =====
->> Use two slashes // and FOUR tilde's to insert your signature at the end of your post: //~~~~
--->
-<!---------------------------------------------->
-<!------------- Equipment Status ---------------->
+//[[User:Mehalana v|Vraj Mehalana]] 10:26, 25 March 2024 (PDT)
-===== Unaxis Etch: Down =====
-We had to take the VAT controller off of this module to get the ICP-PECVD running. I have no immediate ETA for this system coming back online. Until we get this system running again you will need to use the Oxford Cobra system. -- Tony
-// [[User:John d|John d]] 09:35, 13 February 2023 (PST)
-===== Flip-Chip Bonder repair =====
+=====ALD Oxford UP=====
+All three chambers are operating properly.
-The repaired heaters and controllers have shipped and are on the way. I don't have a firm delivery date yet as they need to clear customs once they make it to the states.  -- Tony Bosch
-// [[User:John d|John d]] 19:12, 25 February 2023 (PST)
+//[[User:Mehalana v|Vraj Mehalana]] 13:48, 19 March 2024 (PDT)
-===== Dektak XT ready for training =====
+=====DI and Waste Water systems=====
+DI and Waste Water systems will be down for upgrade April 5th and 6th.
-We have replaced the Dektak 6M with a new Dektak XT profilometer. The system is available for training, please [[Aidan_Hopkins|contact the tool supervisor]].
-// [[User:John d|John d]] 10:08, 7 February 2023 (PST)
+//[[User:Mehalana v|Vraj Mehalana]] 11:55, 18 March 2024 (PDT)
+=====ICP1 Down=====
+The board we were waiting on arrived, but it did not resolve the tool issue. We are working with Panasonic on the next steps.
+//[[User:Mehalana v|Vraj Mehalana]] 14:17, 1 March 2024 (PST)
-===== Au Plating: DOWN =====
+=====Job Opening: Process Engineer=====
+The Nanofab has a current job opening for a Process/Wafer-Fab Engineer, see the [https://wiki.nanofab.ucsb.edu/wiki/Nanofab_Job_Postings NanoFab Job Openings page] for details.
-Bath damaged, system is down for repair.
-// [[User:John d|John d]] 08:48, 27 October 2022 (PDT)
+//[[User:John d|Demis D. John]] 14:52, 30 October 2023 (PDT)
-<!---------- end of Equipment Status ------------>
+=====Lab Access Changes: Symmetry App=====
+Card/Iris scanner access is still currently enabled.  However we will be moving to a smartphone-based access system.  '''IMPORTANT''': check your email to setup the new smartphone access system, so you will be ready when we switch to the new system. Look for an email titled '''''"Invitation to Access Symmetry App"'''''.
+// [[User:John d|John d]] 13:49, 7 November 2023 (PST)
+=====Wafer Bonder, (Suss SB6-8E)=====
+SUSS aims to be on site in early February.  We’ll will send out an email once I get confirmation for a specific date.
+//[[User:Mehalana v|Vraj Mehalana]] 14:23, 13 December 2023 (PST)
+<!--
+SEE THE BOTTOM OF THIS PAGE FOR DETAILED INSTRUCTIONS ON ADDING NEWS ITEMS.
+In order for your post to show up correctly, you need to:
+>> Use FIVE equal-signs for the Title's heading level.  eg.: ===== my post =====
+>> Use two slashes // and FOUR tilde's to insert your signature at the end of your post: //~~~~
+-->
 <!---------DO NOT EDIT BELOW THIS LINE----------->
 <endfeed />
@@ Line 36: / Line 43: @@
 <!--------------------------------------------
 ====== HOW TO ADD ITEMS ======
 * You can copy/paste the example below for a new news item.
 * Use level 5 heading for each item (5 equal signs surrounding the title) - they will show up as separate RSS items this way.  (This looks best on the Wiki homepage)