Difference between revisions of "Template:Announcements"

Revision as of 10:26, 25 March 2024

Stepper #3 (ASML DUV) - Down for PM on April 15th-19th

ASML Engineers will be on-site to perform the Annual Periodic Maintenance on the tool from Monday April 15th through April 19th. The tool will be unavailable for use during this time.

Please plan your work accordingly.

//Vraj Mehalana 10:26, 25 March 2024 (PDT)

ALD Oxford UP

All three chambers are operating properly. //Vraj Mehalana 13:48, 19 March 2024 (PDT)

DI and Waste Water systems

DI and Waste Water systems will be down for upgrade April 5th and 6th. //Vraj Mehalana 11:55, 18 March 2024 (PDT)

ICP1 Down

The board we were waiting on arrived, but it did not resolve the tool issue. We are working with Panasonic on the next steps. //Vraj Mehalana 14:17, 1 March 2024 (PST)

Job Opening: Process Engineer

The Nanofab has a current job opening for a Process/Wafer-Fab Engineer, see the NanoFab Job Openings page for details.

//Demis D. John 14:52, 30 October 2023 (PDT)

Lab Access Changes: Symmetry App

Card/Iris scanner access is still currently enabled. However we will be moving to a smartphone-based access system. IMPORTANT: check your email to setup the new smartphone access system, so you will be ready when we switch to the new system. Look for an email titled "Invitation to Access Symmetry App". // John d 13:49, 7 November 2023 (PST)

Wafer Bonder, (Suss SB6-8E)

SUSS aims to be on site in early February. We’ll will send out an email once I get confirmation for a specific date. //Vraj Mehalana 14:23, 13 December 2023 (PST)

@@ Line 1: / Line 1: @@
 <startfeed />
+=====Stepper #3 (ASML DUV) - Down for PM on April 15th-19th=====
-<!--feedBurner name="UCSBNanofab-Announcements" /-->
+ASML Engineers will be on-site to perform the Annual Periodic Maintenance on the tool from
-<!-- Description of the RSS feed -->
+Monday April 15th through April 19th.  The tool will be unavailable for use during this time.
-'''''Important Announcements'''''
-----
-<!--
-SEE THE BOTTOM OF THIS PAGE FOR DETAILED INSTRUCTIONS ON ADDING NEWS ITEMS.
+Please plan your work accordingly.
-In order for your post to show up correctly, you need to:
->> Use FIVE equal-signs for the Title's heading level.  eg.: ===== my post =====
->> Use two slashes // and FOUR tilde's to insert your signature at the end of your post: //~~~~
--->
-<!---------------------------------------------->
-<!------------- Equipment Status ---------------->
+//[[User:Mehalana v|Vraj Mehalana]] 10:26, 25 March 2024 (PDT)
-===== Unaxis-Dep: Up =====
-New bottle of Deuterated Silane (SiD4) has been installed, we've qualified the SiO2 process and it looks good.  Films are ready to use.
-// [[User:John d|John d]] 10:11, 17 June 2022 (PDT)
-===== ASML Down =====
+=====ALD Oxford UP=====
+All three chambers are operating properly.
-All hardware replacements are scheduled to arrive today, and ASML engineers will be on-site next week to get the system back up.
+//[[User:Mehalana v|Vraj Mehalana]] 13:48, 19 March 2024 (PDT)
+=====DI and Waste Water systems=====
-We will likely be installing a new computer on the system next week. We have all user jobs backed up, so no user data will be lost in the transfer.  However, the sync scripts for python ASML-JobCreator scripting will need to be re-written, so the automatic syncing for JobCreator will be unavailable until I rewrite those.
+DI and Waste Water systems will be down for upgrade April 5th and 6th.
-// [[User:John d|John d]] 10:01, 17 June 2022 (PDT)
+//[[User:Mehalana v|Vraj Mehalana]] 11:55, 18 March 2024 (PDT)
+=====ICP1 Down=====
+The board we were waiting on arrived, but it did not resolve the tool issue. We are working with Panasonic on the next steps.
+//[[User:Mehalana v|Vraj Mehalana]] 14:17, 1 March 2024 (PST)
-===== Masks Optional as of June 13 =====
+=====Job Opening: Process Engineer=====
+The Nanofab has a current job opening for a Process/Wafer-Fab Engineer, see the [https://wiki.nanofab.ucsb.edu/wiki/Nanofab_Job_Postings NanoFab Job Openings page] for details.
-You are not required to wear a mask in UC buildings at this time. You are also not required to wear a mask in the Nanofab if desired.
+//[[User:John d|Demis D. John]] 14:52, 30 October 2023 (PDT)
-We will still provide masks at the metal table in front of the cleanroom entry.
-See the [https://t.e2ma.net/webview/be2nag/25634e9f535619ce1f4eb976598e7268 UCSB announcement at this link].
+=====Lab Access Changes: Symmetry App=====
-See the full policies at '''[[COVID-19_User_Policies]]'''
+Card/Iris scanner access is still currently enabled.  However we will be moving to a smartphone-based access system.  '''IMPORTANT''': check your email to setup the new smartphone access system, so you will be ready when we switch to the new system. Look for an email titled '''''"Invitation to Access Symmetry App"'''''.
-// [[User:John d|John d]] 11:20, 13 June 2022 (PDT)
+// [[User:John d|John d]] 13:49, 7 November 2023 (PST)
-===== PureStrip Bath Heater DOWN =====
+=====Wafer Bonder, (Suss SB6-8E)=====
+SUSS aims to be on site in early February.  We’ll will send out an email once I get confirmation for a specific date.
-The temperature controller on the PureStrip vertical bath in Bay 4 acid bench has failed, do not attempt to use until we replace it.
-// [[User:John d|John d]] 16:09, 10 June 2022 (PDT)
+//[[User:Mehalana v|Vraj Mehalana]] 14:23, 13 December 2023 (PST)
+<!--
-===== Gasonics Down =====
+SEE THE BOTTOM OF THIS PAGE FOR DETAILED INSTRUCTIONS ON ADDING NEWS ITEMS.
-Leak in main chamber, tool is down.
+In order for your post to show up correctly, you need to:
-// [[User:John d|John d]] 14:35, 27 May 2022 (PDT)
+>> Use FIVE equal-signs for the Title's heading level.  eg.: ===== my post =====
+>> Use two slashes // and FOUR tilde's to insert your signature at the end of your post: //~~~~
-===== New EBL Rates =====
+-->
-Effective Dec.1, 2021, all of our electron beam lithography rates are lowered.  The new rates are as follows:
+<!---------DO NOT EDIT BELOW THIS LINE----------->
-Industrial Users:  $405/hour
-UC Academic Users:  $126/hour
-Non-UC Academic Users:  $150/hour
-UCSB CNSI Incubator USers:  $260/hour
-//[[User:Thibeault|Thibeault]] 12:21, 9 December 2021 (PST)
-<!---------- end of Equipment Status ------------>
-<!---------------------------------------------->
 <endfeed />
 <noinclude>[[Category:Templates]]</noinclude>
 <!--------------------------------------------
+====== HOW TO ADD ITEMS ======
-====== HOW TO ADD NEWS ITEMS ======
 * You can copy/paste the example below for a new news item.
 * Use level 5 heading for each item (5 equal signs surrounding the title) - they will show up as separate RSS items this way.  (This looks best on the Wiki homepage)
-* You must add a user signature at the end of each post via four tildes: ~~~~. Required for the RSS plugin to determine the timestamp, or else post goes to the end of the RSS feed.
+* You must add a user signature at the end of each post via four tildes: [[User:Silva|Silva]] 13:26, 4 February 2023 (PST). Required for the RSS plugin to determine the timestamp, or else post goes to the end of the RSS feed.
 * Use double-slash:   //   at start of new lines - makes display on the Samsung Display look a lot better, since it strips newlines.
 * Optional: After saving the page, delete the name after the two dashes "--" and delete the "[[(talk)...]]" link.
@@ Line 80: / Line 58: @@
 ===== NanoFab making LN2 icecream =====
 Tomorrow the NanoFab will be serving liquid nitrogen ice cream.
+// [[User:Silva|Silva]] 13:26, 4 February 2023 (PST)
-// ~~~~
 ************* (end of example) **************
-The ~~~~ will be replaced with your username & timestamp after you submit the post.
+The [[User:Silva|Silva]] 13:26, 4 February 2023 (PST) will be replaced with your username & timestamp after you submit the post.
 ---------------------------------------------->