Difference between revisions of "Template:Announcements"

Revision as of 10:26, 25 March 2024

Stepper #3 (ASML DUV) - Down for PM on April 15th-19th

ASML Engineers will be on-site to perform the Annual Periodic Maintenance on the tool from Monday April 15th through April 19th. The tool will be unavailable for use during this time.

Please plan your work accordingly.

//Vraj Mehalana 10:26, 25 March 2024 (PDT)

ALD Oxford UP

All three chambers are operating properly. //Vraj Mehalana 13:48, 19 March 2024 (PDT)

DI and Waste Water systems

DI and Waste Water systems will be down for upgrade April 5th and 6th. //Vraj Mehalana 11:55, 18 March 2024 (PDT)

ICP1 Down

The board we were waiting on arrived, but it did not resolve the tool issue. We are working with Panasonic on the next steps. //Vraj Mehalana 14:17, 1 March 2024 (PST)

Job Opening: Process Engineer

The Nanofab has a current job opening for a Process/Wafer-Fab Engineer, see the NanoFab Job Openings page for details.

//Demis D. John 14:52, 30 October 2023 (PDT)

Lab Access Changes: Symmetry App

Card/Iris scanner access is still currently enabled. However we will be moving to a smartphone-based access system. IMPORTANT: check your email to setup the new smartphone access system, so you will be ready when we switch to the new system. Look for an email titled "Invitation to Access Symmetry App". // John d 13:49, 7 November 2023 (PST)

Wafer Bonder, (Suss SB6-8E)

SUSS aims to be on site in early February. We’ll will send out an email once I get confirmation for a specific date. //Vraj Mehalana 14:23, 13 December 2023 (PST)

@@ Line 1: / Line 1: @@
 <startfeed />
+=====Stepper #3 (ASML DUV) - Down for PM on April 15th-19th=====
-<!--feedBurner name="UCSBNanofab-Announcements" /-->
+ASML Engineers will be on-site to perform the Annual Periodic Maintenance on the tool from
-<!-- Description of the RSS feed -->
+Monday April 15th through April 19th.  The tool will be unavailable for use during this time.
-'''''Equipment Status'''''
-----
-<!--
-SEE THE BOTTOM OF THIS PAGE FOR INSTRUCTIONS ON ADDING NEWS ITEMS.
+Please plan your work accordingly.
-Please use FIVE equal-signs for the Title's heading level.  eg.: ===== my post =====
--->
-<!---------------------------------------------->
-<!------------- Equipment Status ---------------->
+//[[User:Mehalana v|Vraj Mehalana]] 10:26, 25 March 2024 (PDT)
-===== UCSB Flu Vaccination Mandate =====
-UCSB Students, Staff and Faculty are required to recieve a Flu Vaccine by Nov. 1st. <br>Please see the '''[[COVID-19_User_Policies#UCSB_Flu_Vaccination_Mandate|COVID19 Page]]''' for relevant links and information.
-// [[User:John d|John d]] 19:47, 13 October 2020 (PDT)
-===== PEii Technics CF4: Down =====
+=====ALD Oxford UP=====
+All three chambers are operating properly.
-The CF4/O2 PE-ii Technics etcher is down, we are awaiting replacement parts.
-// [[User:John d|John d]] 19:47, 13 October 2020 (PDT)
+//[[User:Mehalana v|Vraj Mehalana]] 13:48, 19 March 2024 (PDT)
-===== NanoFab COVID Response =====
+=====DI and Waste Water systems=====
+DI and Waste Water systems will be down for upgrade April 5th and 6th.
-Following guidelines provided by our Office of Research, the UCSB Nanofabrication Facility is open only for limited/authorized use for critical activity at this time.
+//[[User:Mehalana v|Vraj Mehalana]] 11:55, 18 March 2024 (PDT)
+=====ICP1 Down=====
+The board we were waiting on arrived, but it did not resolve the tool issue. We are working with Panasonic on the next steps.
+//[[User:Mehalana v|Vraj Mehalana]] 14:17, 1 March 2024 (PST)
+=====Job Opening: Process Engineer=====
-Contact the [[Brian Thibeault|Lab Director]] for more information.
+The Nanofab has a current job opening for a Process/Wafer-Fab Engineer, see the [https://wiki.nanofab.ucsb.edu/wiki/Nanofab_Job_Postings NanoFab Job Openings page] for details.
+//[[User:John d|Demis D. John]] 14:52, 30 October 2023 (PDT)
-''The most recent COVID Protocols can be found at '''[[COVID-19_User_Policies]]'''.''
+=====Lab Access Changes: Symmetry App=====
-// [[User:John d|John d]] 15:00, 19 July 2020 (PDT)
+Card/Iris scanner access is still currently enabled.  However we will be moving to a smartphone-based access system.  '''IMPORTANT''': check your email to setup the new smartphone access system, so you will be ready when we switch to the new system. Look for an email titled '''''"Invitation to Access Symmetry App"'''''.
+// [[User:John d|John d]] 13:49, 7 November 2023 (PST)
-===== New Tool Installations =====
+=====Wafer Bonder, (Suss SB6-8E)=====
+SUSS aims to be on site in early February.  We’ll will send out an email once I get confirmation for a specific date.
-See the [https://wiki.nanotech.ucsb.edu/w/index.php/Main_Page#mp-trivia-h2 News Feed] for info on two upcoming tool installations!  The [https://www.raith.com/products/velion.html?mobile=0 Raith Velion FIB] is up and running, we are eagerly awaiting Dr. Dan Read's arrival to bring this tool to life.  See the [[Focused_Ion-Beam_Lithography_(Raith_Velion)|Velion's Tool page here]].
+//[[User:Mehalana v|Vraj Mehalana]] 14:23, 13 December 2023 (PST)
+<!--
-The [https://heidelberg-instruments.com/en/products/mla150.html Heidelberg MLA150 Maskless Aligner] has been installed, and is in the process of being qualified/characterized.  See the [[Maskless_Aligner_(Heidelberg_MLA150)|MLA150's tool page here]].
+SEE THE BOTTOM OF THIS PAGE FOR DETAILED INSTRUCTIONS ON ADDING NEWS ITEMS.
+In order for your post to show up correctly, you need to:
-// [[User:John d|John d]] 17:48, 2 June 2020 (PDT)
+>> Use FIVE equal-signs for the Title's heading level.  eg.: ===== my post =====
+>> Use two slashes // and FOUR tilde's to insert your signature at the end of your post: //~~~~
-===== Unaxis ICP-PECVD =====
+-->
-The ICP-PECVD module is available upon request.  Contact Tony Bosch if interested.  System is using deuterated Silane for low loss optical films use only.
+<!---------DO NOT EDIT BELOW THIS LINE----------->
-// [[User:Thibeault|Thibeault]] 14:22, 26 March 2020 (PDT)
-===== GCA Autostep Maintenance =====
-C will be performing stepper maintenance starting the morning of October 23, 2020. The service will be completed in the afternoon Sunday October 25th. Please plan your process accordingly.
-[[User:Silva|Silva]] 08:19, 23 October 2020 (PDT)
-===== GCA 6300 Maintenance =====
-The 6300 will be down the morning and afternoon Monday October 26, 2020 for maintenance. Please plan your process accordingly.
-[[User:Silva|Silva]] 08:19, 23 October 2020 (PDT)
-<!---------- end of Equipment Status ------------>
-<!---------------------------------------------->
 <endfeed />
 <noinclude>[[Category:Templates]]</noinclude>
 <!--------------------------------------------
+====== HOW TO ADD ITEMS ======
-====== HOW TO ADD NEWS ITEMS ======
 * You can copy/paste the example below for a new news item.
 * Use level 5 heading for each item (5 equal signs surrounding the title) - they will show up as separate RSS items this way.  (This looks best on the Wiki homepage)
-* You must add a user signature at the end of each post via four tildes: ~~~~. Required for the RSS plugin to determine the timestamp, or else post goes to the end of the RSS feed.
+* You must add a user signature at the end of each post via four tildes: [[User:Silva|Silva]] 13:26, 4 February 2023 (PST). Required for the RSS plugin to determine the timestamp, or else post goes to the end of the RSS feed.
 * Use double-slash:   //   at start of new lines - makes display on the Samsung Display look a lot better, since it strips newlines.
 * Optional: After saving the page, delete the name after the two dashes "--" and delete the "[[(talk)...]]" link.
 * Please use "There are no announcements at this time." if the announcements are empty.
-* URL to the RSS feed via FeedBurner (for Samsung display): http://feeds.feedburner.com/UCSBNanofab-Announcements?format=xml
+* URL to the RSS feed via FeedBurner (for Samsung display): http://wiki.nanotech.ucsb.edu/w/index.php?title=Template:Announcements&action=feed&feed=rss
-* URL to the RSS feed directly from Wiki: https://www.nanotech.ucsb.edu/wiki/index.php?title=Template:Announcements&action=feed&feed=rss
+* URL to the RSS feed directly from Wiki: https://wiki.nanotech.ucsb.edu/w/index.php?title=Template:Announcements&action=feed&feed=rss
@@ Line 79: / Line 58: @@
 ===== NanoFab making LN2 icecream =====
 Tomorrow the NanoFab will be serving liquid nitrogen ice cream.
+// [[User:Silva|Silva]] 13:26, 4 February 2023 (PST)
-// ~~~~
 ************* (end of example) **************
-The ~~~~ will be replaced with your username & timestamp after you submit the post.
+The [[User:Silva|Silva]] 13:26, 4 February 2023 (PST) will be replaced with your username & timestamp after you submit the post.
 ---------------------------------------------->