Difference between revisions of "Template:Announcements"

Revision as of 10:26, 25 March 2024

Stepper #3 (ASML DUV) - Down for PM on April 15th-19th

ASML Engineers will be on-site to perform the Annual Periodic Maintenance on the tool from Monday April 15th through April 19th. The tool will be unavailable for use during this time.

Please plan your work accordingly.

//Vraj Mehalana 10:26, 25 March 2024 (PDT)

ALD Oxford UP

All three chambers are operating properly. //Vraj Mehalana 13:48, 19 March 2024 (PDT)

DI and Waste Water systems

DI and Waste Water systems will be down for upgrade April 5th and 6th. //Vraj Mehalana 11:55, 18 March 2024 (PDT)

ICP1 Down

The board we were waiting on arrived, but it did not resolve the tool issue. We are working with Panasonic on the next steps. //Vraj Mehalana 14:17, 1 March 2024 (PST)

Job Opening: Process Engineer

The Nanofab has a current job opening for a Process/Wafer-Fab Engineer, see the NanoFab Job Openings page for details.

//Demis D. John 14:52, 30 October 2023 (PDT)

Lab Access Changes: Symmetry App

Card/Iris scanner access is still currently enabled. However we will be moving to a smartphone-based access system. IMPORTANT: check your email to setup the new smartphone access system, so you will be ready when we switch to the new system. Look for an email titled "Invitation to Access Symmetry App". // John d 13:49, 7 November 2023 (PST)

Wafer Bonder, (Suss SB6-8E)

SUSS aims to be on site in early February. We’ll will send out an email once I get confirmation for a specific date. //Vraj Mehalana 14:23, 13 December 2023 (PST)

@@ Line 1: / Line 1: @@
 <startfeed />
+=====Stepper #3 (ASML DUV) - Down for PM on April 15th-19th=====
-<!--feedBurner name="UCSBNanofab-Announcements" /-->
+ASML Engineers will be on-site to perform the Annual Periodic Maintenance on the tool from
-<!-- Description of the RSS feed -->
+Monday April 15th through April 19th.  The tool will be unavailable for use during this time.
-''UCSB NanoFab Announcements''
-<!--
-'''How to add new news items'''
+Please plan your work accordingly.
-* Use level 5 heading for each item (5 equal signs) - they will show up as separate RSS items this way.  (looks best on the Wiki homepage)
-* You must add a user signature at the end of each post via four tildes: ~~~~. Required for the RSS plugin to determine the timestamp, or else post goes to the end of the RSS feed.
-* Use double-slash:   //   at start of new lines - makes display on the Samsung Display look a lot better, since it strips newlines.
-* Optional: After saving the page, delete the name after the two dashes "--" and delete the "[[(talk)...]]" link.
-* "There are no announcements at this time." should be used when empty.
+//[[User:Mehalana v|Vraj Mehalana]] 10:26, 25 March 2024 (PDT)
+=====ALD Oxford UP=====
-Example of a new post:
+All three chambers are operating properly.
+//[[User:Mehalana v|Vraj Mehalana]] 13:48, 19 March 2024 (PDT)
-===== NanoFab making LN2 icecream =====
+=====DI and Waste Water systems=====
+DI and Waste Water systems will be down for upgrade April 5th and 6th.
-Tomorrow the NanoFab will be serving liquid nitrogen ice cream.
+//[[User:Mehalana v|Vraj Mehalana]] 11:55, 18 March 2024 (PDT)
-// ~~~~
+=====ICP1 Down=====
+The board we were waiting on arrived, but it did not resolve the tool issue. We are working with Panasonic on the next steps.
+//[[User:Mehalana v|Vraj Mehalana]] 14:17, 1 March 2024 (PST)
+=====Job Opening: Process Engineer=====
+The Nanofab has a current job opening for a Process/Wafer-Fab Engineer, see the [https://wiki.nanofab.ucsb.edu/wiki/Nanofab_Job_Postings NanoFab Job Openings page] for details.
+//[[User:John d|Demis D. John]] 14:52, 30 October 2023 (PDT)
-(end of example)
-The ~~~~ will be replaced with your username & timestamp after you submit the post.
+=====Lab Access Changes: Symmetry App=====
--->
+Card/Iris scanner access is still currently enabled.  However we will be moving to a smartphone-based access system.  '''IMPORTANT''': check your email to setup the new smartphone access system, so you will be ready when we switch to the new system. Look for an email titled '''''"Invitation to Access Symmetry App"'''''.
-<!---------------------------------------------->
+// [[User:John d|John d]] 13:49, 7 November 2023 (PST)
-<!------------- Announcements ---------------->
-===== PECVD#2 Upgrade, Retraining required =====
-Plasmatherm will be here Monday April 16, 2018 to upgrade the system
-software. The user interface will be completely different from what it
-is now. All users will be disqualified and will need to be retrained
-to access the system through Signupmonkey. We will schedule training
-sessions for the middle of next week.
-// [[User:John d|John d]] 17:53, 13 April 2018 (PDT)
-===== 90°C Hotplate Down =====
+=====Wafer Bonder, (Suss SB6-8E)=====
+SUSS aims to be on site in early February.  We’ll will send out an email once I get confirmation for a specific date.
-°C hotplate is down, Do not use! Reads 90C but is actually 160C.
-// [[User:John d|John d]] 17:53, 13 April 2018 (PDT)
+//[[User:Mehalana v|Vraj Mehalana]] 14:23, 13 December 2023 (PST)
+<!--
-===== RIE#5 Down Thurs 4/19 =====
+SEE THE BOTTOM OF THIS PAGE FOR DETAILED INSTRUCTIONS ON ADDING NEWS ITEMS.
-RIE #5 will be down al day next Thursday 4/19/18 so that we can work
+In order for your post to show up correctly, you need to:
-on the SiCl4 gas line. We are going to install a new MFC and some
+>> Use FIVE equal-signs for the Title's heading level.  eg.: ===== my post =====
-other components and we need a long time to pump and purge the line.
+>> Use two slashes // and FOUR tilde's to insert your signature at the end of your post: //~~~~
-// [[User:John d|John d]] 13:48, 12 April 2018 (PDT)
+-->
+<!---------DO NOT EDIT BELOW THIS LINE----------->
+<endfeed />
+<noinclude>[[Category:Templates]]</noinclude>
+<!--------------------------------------------
+====== HOW TO ADD ITEMS ======
+* You can copy/paste the example below for a new news item.
+* Use level 5 heading for each item (5 equal signs surrounding the title) - they will show up as separate RSS items this way.  (This looks best on the Wiki homepage)
+* You must add a user signature at the end of each post via four tildes: [[User:Silva|Silva]] 13:26, 4 February 2023 (PST). Required for the RSS plugin to determine the timestamp, or else post goes to the end of the RSS feed.
+* Use double-slash:   //   at start of new lines - makes display on the Samsung Display look a lot better, since it strips newlines.
+* Optional: After saving the page, delete the name after the two dashes "--" and delete the "[[(talk)...]]" link.
+* Please use "There are no announcements at this time." if the announcements are empty.
+* URL to the RSS feed via FeedBurner (for Samsung display): http://wiki.nanotech.ucsb.edu/w/index.php?title=Template:Announcements&action=feed&feed=rss
-===== ADT Dicing Saw: Intermittent Software Issue =====
+* URL to the RSS feed directly from Wiki: https://wiki.nanotech.ucsb.edu/w/index.php?title=Template:Announcements&action=feed&feed=rss
-One of the DB files keeps getting corrupted.  We've restored the system back to the backup created yesterday afternoon and the saw is up and running.  Looking into a longer term fix.  If you created a new recipe within the last 5 days you may need to re-create it.
-// [[User:John d|John d]] 21:43, 27 March 2018 (PDT)
-===== EBeam #4: Re-Training Required =====
-The upgrade is complete and working well. All users will be required
-to be trained again. The high voltage, sweep and turret controls are
-all new.
-// [[User:John d|John d]] 12:13, 26 March 2018 (PDT)
+******** EXAMPLE OF A NEW POST ********
-===== PECVD #2: UP with possible High Particulates =====
-We are still experiencing high particle counts in the Advanced Vacuum
-PECVD process. Our next step is to replace the Silane MFC. I will
-update you once I have a lead time on the new MFC. Most likely it will
-take several weeks to receive. Until then, the system is operational
-and can be used if your process is not sensitive to high particle
-counts.
-// [[User:John d|Posted:]] 13:22, 19 March 2018 (PDT)
-===== Gasonics: Up =====
+===== NanoFab making LN2 icecream =====
+Tomorrow the NanoFab will be serving liquid nitrogen ice cream.
-The process chamber mechanical pump is struggling to make base pressure but the system is able to successfully run. We are waiting for the replacement pump to be repaired and returned.
-// [[User:John d|Posted:]] 10:14, 12 February 2018 (PST)
+// [[User:Silva|Silva]] 13:26, 4 February 2023 (PST)
+************* (end of example) **************
-===== Cary 500 Down =====
+The [[User:Silva|Silva]] 13:26, 4 February 2023 (PST) will be replaced with your username & timestamp after you submit the post.
-UV-Vis Detector Failure. Tool is able to used from 600nm and up. Looking into replacement options.
+---------------------------------------------->
-// [[User:John d|Posted:]] 13:47, 12 February 2018 (PST)
-<!---------- end of announcements ------------>
-<!---------------------------------------------->
-<endfeed />
-<noinclude>[[Category:Templates]]</noinclude>