Step Profilometer (KLA Tencor P-7)

From UCSB Nanofab Wiki
Revision as of 16:08, 28 February 2022 by John d (talk | contribs) (→‎Detailed Specifications: added basic info)
Jump to navigation Jump to search
Step Profilometer (KLA Tencor P-7)
KLA-Tencor-P7 Photo.JPG
Tool Type Inspection, Test and Characterization
Location Bay 4
Supervisor Bill Millerski
Supervisor Phone (805) 893-2655
Supervisor E-Mail wmillerski@ucsb.edu
Description Surface Profilometer
Manufacturer KLA Tencor


About

The KLA-Tencor P7 profilometer is a stylus profilometer that drags a stylus across the wafer surface with controlled pressure, aligned via microcope, and measures the step-heights of surface features during the measurement. The system has a motor-controlled stage for X/Y/Rotation, and is typically used to measure step heights in single areas on various sample sizes frmo small pieces to 4-inch wafers. It can be programmed to scan multiple locations on a single wafer or 3D areas topography.

Detailed Specifications

  • Probe Tip has a 2um radius and a 60 degree angle
  • Maximum wafer size: ____
  • 1D Profile and 2D Raster Scanning
  • Lateral Resolution: _____
  • Height Resolution: _____

Instructions