Difference between revisions of "Template:Announcements"

Latest revision as of 13:32, 1 June 2024

EBeam4 is up

EBeam4 is back up.

The overnight regen of the cryo was completed this morning. I then tested the operation of the hoist numerous times without issue. I tested the EBeam by running 200A of Ti without issue.

System UP

//10:36, 30 May 2024 (PDT)

Stepper #1 (GCA 6300) - Tool availability

Stepper #1 (6300) will be undergoing maintenance and be unavailable the following dates and times:

6-18-24 at 8:00am Till 6-20-24 at 5:00pm

Please plan your processing activities accordingly. //13:32, 1 June 2024 (PDT)

Stepper #2 (GCA Autostep 200) - Tool availability

Stepper #2 (AutoStep 200) will be undergoing maintenance and be unavailable the following dates and times:

6-21-24 at 8:00am Till 6-21-24 at 5:00pm

Please plan your processing activities accordingly.

Thanks Bill Millerski UCSB //13:32, 1 June 2024 (PDT)

Stepper #3 (ASML DUV) - System UP and calibrated

We have finished calibrations, System is up.

Reminder to check/recalibrate your exposure dose. Focus should be the same, but beam optics changeout will affect dose. //Vraj Mehalana 11:17, 24 May 2024 (PDT)

Unaxis VLR still Down

The chiller has a decent sized ball of ice inside of it.

I need to let that melt off before I can do a proper diagnosis of what is causing the high pressure cut off to trip when the refrigerant pressures seem normal. //13:29, 1 June 2024 (PDT)

//Vraj Mehalana 11:17, 24 May 2024 (PDT)

Atomic Force Microscope (Dimension ICON) - 05/17: System UP

Head was repaired and returned today. A quick test showed correct performance. Note also that the pin board has been repaired so all 4 pins are now present. Lets keep it that way so please be careful when loading the tip holder!

//Vraj Mehalana 13:46, 20 May 2024 (PDT)

MA6 TSA is down - Update

Due to unforeseen circumstances our FSE will not be onsite next week to work on the TSA microscope. They have rescheduled with us for Thursday of the following week, 6/13. I apologize for the inconvenience.

Per my previous email, there is a MA6 available for use at CNSI. Here is a link to the webpage for their tools:

https://www.cnsi.ucsb.edu/facilities/quantum-structures/nanofabrication

-Lee //15:59, 22 May 2024 (PDT)

Velion FIB Tool DOWN

Raith service are installing and aligning a new GaBiLi source. The Velion FIB column is not available to users until further notice.

//Vraj Mehalana 10:58, 30 April 2024 (PDT)

ICP1 Down

The board we were waiting on arrived, but it did not resolve the tool issue. We are working with Panasonic on the next steps. //Vraj Mehalana 14:17, 1 March 2024 (PST)

Lab Access Changes: Symmetry App

The iris scanner has been decommissioned. Please use the card reader which supports:

-Physical card

-Mobile phone via Symmetry App

//10:54, 23 May 2024 (PDT)

Wafer Bonder, (Suss SB6-8E)

SUSS aims to be on site in early February. We’ll will send out an email once I get confirmation for a specific date. //Vraj Mehalana 14:23, 13 December 2023 (PST)

@@ Line 1: / Line 1: @@
 <startfeed />
+===== EBeam4 is up=====
-<!--feedBurner name="UCSBNanofab-Announcements" /-->
+EBeam4 is back up.
-<!-- Description of the RSS feed -->
-'''''Important Announcements'''''
-----
-<!--
-SEE THE BOTTOM OF THIS PAGE FOR DETAILED INSTRUCTIONS ON ADDING NEWS ITEMS.
+The overnight regen of the cryo was completed this morning.
-In order for your post to show up correctly, you need to:
+I then tested the operation of the hoist numerous times without issue.
->> Use FIVE equal-signs for the Title's heading level.  eg.: ===== my post =====
+I tested the EBeam by running 200A of Ti without issue.
->> Use two slashes // and FOUR tilde's to insert your signature at the end of your post: //~~~~
--->
-<!---------------------------------------------->
-<!------------- Equipment Status ---------------->
+System UP
-===== PureStrip Bath Heater DOWN =====
-THe temperature controller on the PureStrip vertical bath in Bay 4 acid bench has failed, do not attempt to use until we replace it.
-// [[User:John d|John d]] 16:09, 10 June 2022 (PDT)
+//10:36, 30 May 2024 (PDT)
-===== ASML Down =====
-Hardware delivery ETA updated to June 17th.
-We’ll schedule an ASML engineer on-site visit to perform the installation, verification and system calibrations.
-We may have been able to revive the TCU, but have another electrical hardware failure that requires a new part from ASML.
-// [[User:John d|John d]] 12:54, 9 June 2022 (PDT)
-===== Gasonics Down =====
+=====Stepper #1 (GCA 6300) - Tool availability=====
+Stepper #1 (6300) will be undergoing maintenance and be unavailable the following dates and times:
-Leak in main chamber, tool is down.
-// [[User:John d|John d]] 14:35, 27 May 2022 (PDT)
+-18-24 at 8:00am
-===== Masks Mandatory: May 27-June 12 =====
+Till
-UCSB has reinstituted a mandatory mask mandate for all indoor spaces on campus.
+-20-24 at 5:00pm
+Please plan your processing activities accordingly.
-The mandate begins May 27, and extends through June 12.
+//13:32, 1 June 2024 (PDT)
+=====Stepper #2 (GCA Autostep 200) - Tool availability=====
-See the [https://info.ia.ucsb.edu/message/4luhko/0equghb full announcement at this link].
+Stepper #2 (AutoStep 200) will be undergoing maintenance and be unavailable the following dates and times:
+-21-24 at 8:00am
-We will provide masks at the metal table in front of the cleanroom entry.
+Till
+-21-24 at 5:00pm
+Please plan your processing activities accordingly.
-See the full policies at '''[[COVID-19_User_Policies]]'''
-// [[User:John d|John d]] 15:48, 26 May 2022 (PDT)
+Thanks
-===== Unaxis-Dep: Down =====
+Bill Millerski
-Deuterated Silane (SiD4) is out.  Bottle delivery delayed from vendor - see email for updates.
+UCSB
-// [[User:John d|John d]] 23:10, 4 June 2022 (PDT)
+//13:32, 1 June 2024 (PDT)
-===== New EBL Rates =====
+=====Stepper #3 (ASML DUV) - System UP and calibrated=====
+We have finished calibrations,
-Effective Dec.1, 2021, all of our electron beam lithography rates are lowered.  The new rates are as follows:
+System is up.
+Reminder to check/recalibrate your exposure dose. Focus should be the same, but beam optics changeout will affect dose.
-Industrial Users:  $405/hour
+//[[User:Mehalana v|Vraj Mehalana]] 11:17, 24 May 2024 (PDT)
+=====Unaxis VLR still Down=====
-UC Academic Users:  $126/hour
+The chiller has a decent sized ball of ice inside of it.
-Non-UC Academic Users:  $150/hour
+I need to let that melt off before I can do a proper diagnosis of what is causing the high pressure cut off to trip when the refrigerant pressures seem normal.
-UCSB CNSI Incubator USers:  $260/hour
+//13:29, 1 June 2024 (PDT)
-//[[User:Thibeault|Thibeault]] 12:21, 9 December 2021 (PST)
+//[[User:Mehalana v|Vraj Mehalana]] 11:17, 24 May 2024 (PDT)
+=====Atomic Force Microscope (Dimension ICON) - 05/17: System UP=====
-<!---------- end of Equipment Status ------------>
+Head was repaired and returned today.  A quick test showed correct performance.  Note also that the pin board has been repaired so all 4 pins are now present.  Lets keep it that way so please be careful when loading the tip holder!
-<!---------------------------------------------->
-<endfeed />
-<noinclude>[[Category:Templates]]</noinclude>
-<!--------------------------------------------
+//[[User:Mehalana v|Vraj Mehalana]] 13:46, 20 May 2024 (PDT)
+=====MA6 TSA is down - Update=====
+Due to unforeseen circumstances our FSE will not be onsite next week to work on the TSA microscope. They have rescheduled with us for Thursday of the following week, 6/13. I apologize for the inconvenience.
+Per my previous email, there is a MA6 available for use at CNSI. Here is a link to the webpage for their tools:
+https://www.cnsi.ucsb.edu/facilities/quantum-structures/nanofabrication
-====== HOW TO ADD NEWS ITEMS ======
+-Lee
+//15:59, 22 May 2024 (PDT)
+=====Velion FIB Tool DOWN=====
+Raith service are installing and aligning a new GaBiLi source. The Velion FIB column is not available to users until further notice.
+//[[User:Mehalana v|Vraj Mehalana]] 10:58, 30 April 2024 (PDT)
+=====ICP1 Down=====
+The board we were waiting on arrived, but it did not resolve the tool issue. We are working with Panasonic on the next steps.
+//[[User:Mehalana v|Vraj Mehalana]] 14:17, 1 March 2024 (PST)
+=====Lab Access Changes: Symmetry App=====
+The iris scanner has been decommissioned. Please use the card reader which supports:
+-Physical card
+-Mobile phone via Symmetry App
+//10:54, 23 May 2024 (PDT)
+=====Wafer Bonder, (Suss SB6-8E)=====
+SUSS aims to be on site in early February.  We’ll will send out an email once I get confirmation for a specific date.
+//[[User:Mehalana v|Vraj Mehalana]] 14:23, 13 December 2023 (PST)
+<!--
+SEE THE BOTTOM OF THIS PAGE FOR DETAILED INSTRUCTIONS ON ADDING NEWS ITEMS.
+In order for your post to show up correctly, you need to:
+>> Use FIVE equal-signs for the Title's heading level.  eg.: ===== my post =====
+>> Use two slashes // and FOUR tilde's to insert your signature at the end of your post: //~~~~
+-->
+<!---------DO NOT EDIT BELOW THIS LINE----------->
+<endfeed />
+<noinclude>[[Category:Templates]]</noinclude>
+<!--------------------------------------------
+====== HOW TO ADD ITEMS ======
 * You can copy/paste the example below for a new news item.
 * Use level 5 heading for each item (5 equal signs surrounding the title) - they will show up as separate RSS items this way.  (This looks best on the Wiki homepage)
-* You must add a user signature at the end of each post via four tildes: ~~~~. Required for the RSS plugin to determine the timestamp, or else post goes to the end of the RSS feed.
+* You must add a user signature at the end of each post via four tildes: [[User:Silva|Silva]] 13:26, 4 February 2023 (PST). Required for the RSS plugin to determine the timestamp, or else post goes to the end of the RSS feed.
 * Use double-slash:   //   at start of new lines - makes display on the Samsung Display look a lot better, since it strips newlines.
 * Optional: After saving the page, delete the name after the two dashes "--" and delete the "[[(talk)...]]" link.
@@ Line 83: / Line 114: @@
 ===== NanoFab making LN2 icecream =====
 Tomorrow the NanoFab will be serving liquid nitrogen ice cream.
+// [[User:Silva|Silva]] 13:26, 4 February 2023 (PST)
-// ~~~~
 ************* (end of example) **************
-The ~~~~ will be replaced with your username & timestamp after you submit the post.
+The [[User:Silva|Silva]] 13:26, 4 February 2023 (PST) will be replaced with your username & timestamp after you submit the post.
 ---------------------------------------------->