Difference between revisions of "Template:Announcements"

Latest revision as of 15:59, 22 May 2024

Atomic Force Microscope (Dimension ICON) - 05/17: System UP

Head was repaired and returned today. A quick test showed correct performance. Note also that the pin board has been repaired so all 4 pins are now present. Lets keep it that way so please be careful when loading the tip holder!

//Vraj Mehalana 13:46, 20 May 2024 (PDT)

MA6 TSA is down - Update

We have received the replacement motor for the TSA Y axis. The FSE will be onsite Monday June 3rd to work on the tool.

The tool remains up for backside alignment and topside exposures that do not require alignment.

-Lee //15:59, 22 May 2024 (PDT)

Velion FIB Tool DOWN

Raith service are installing and aligning a new GaBiLi source. The Velion FIB column is not available to users until further notice.

//Vraj Mehalana 10:58, 30 April 2024 (PDT)

Stepper #3 (ASML DUV) - Pneumatics repaired, extra day for optics

We were able to repair the pneumatics issue and are currently running reticle and wafer reproducability runs overnight to exercise/test the system.

Consequently the optics was only started today, so will take one day longer than planned - we will extend this visit to Thursday to complete the work.

Sorry for the inconvenience.

//Vraj Mehalana 19:04, 21 May 2024 (PDT)

ICP1 Down

The board we were waiting on arrived, but it did not resolve the tool issue. We are working with Panasonic on the next steps. //Vraj Mehalana 14:17, 1 March 2024 (PST)

Lab Access Changes: Symmetry App

Card/Iris scanner access is still currently enabled. However we will be moving to a smartphone-based access system. IMPORTANT: check your email to setup the new smartphone access system, so you will be ready when we switch to the new system. Look for an email titled "Invitation to Access Symmetry App". // John d 13:49, 7 November 2023 (PST)

Wafer Bonder, (Suss SB6-8E)

SUSS aims to be on site in early February. We’ll will send out an email once I get confirmation for a specific date. //Vraj Mehalana 14:23, 13 December 2023 (PST)

@@ Line 1: / Line 1: @@
 <startfeed />
+=====Atomic Force Microscope (Dimension ICON) - 05/17: System UP=====
-<!--feedBurner name="UCSBNanofab-Announcements" /-->
+Head was repaired and returned today.  A quick test showed correct performance.  Note also that the pin board has been repaired so all 4 pins are now present.  Lets keep it that way so please be careful when loading the tip holder!
-<!-- Description of the RSS feed -->
-'''''Important Announcements'''''
-----
-<!--
-SEE THE BOTTOM OF THIS PAGE FOR DETAILED INSTRUCTIONS ON ADDING NEWS ITEMS.
+//[[User:Mehalana v|Vraj Mehalana]] 13:46, 20 May 2024 (PDT)
-In order for your post to show up correctly, you need to:
->> Use FIVE equal-signs for the Title's heading level.  eg.: ===== my post =====
->> Use two slashes // and FOUR tilde's to insert your signature at the end of your post: //~~~~
--->
-<!---------------------------------------------->
-<!------------- Equipment Status ---------------->
-===== NanoFab CLOSED: Wed June 1, 6-9:30am =====
+=====MA6 TSA is down - Update=====
+We have received the replacement motor for the TSA Y axis. The FSE will be onsite Monday June 3rd to work on the tool.
-'''The cleanroom will be closed to users from 6am to 9am on Wed June 1st,''' to allow Campus facilities to perform yearly emergency generator testing.
+The tool remains up for backside alignment and topside exposures that do not require alignment.
-Update 2022-06-01: working an issue with HVAC - expect to be open by 9:30am. Check email for updates.
+-Lee
-Please plan accordingly.
-// [[User:John d|John d]] 08:58, 1 June 2022 (PDT)
+//15:59, 22 May 2024 (PDT)
-===== Masks Mandatory: May 27-June 12 =====
+=====Velion FIB Tool DOWN=====
+Raith service are installing and aligning a new GaBiLi source. The Velion FIB column is not available to users until further notice.
-UCSB has reinstituted a mandatory mask mandate for all indoor spaces on campus.
+//[[User:Mehalana v|Vraj Mehalana]] 10:58, 30 April 2024 (PDT)
-The mandate begins '''tomorrow, May 27''', and extends through June 12.
+=====Stepper #3 (ASML DUV) - Pneumatics repaired, extra day for optics=====
-See the [https://info.ia.ucsb.edu/message/4luhko/0equghb full announcement at this link].
+We were able to repair the pneumatics issue and are currently running reticle and wafer reproducability runs overnight to exercise/test the system.
+Consequently the optics was only started today, so will take one day longer than planned - we will extend this visit to Thursday to complete the work.
-We will provide masks at the metal table in front of the cleanroom entry.
+Sorry for the inconvenience.
-See the full policies at '''[[COVID-19_User_Policies]]'''
-// [[User:John d|John d]] 15:48, 26 May 2022 (PDT)
+//[[User:Mehalana v|Vraj Mehalana]] 19:04, 21 May 2024 (PDT)
-===== Unaxis-Dep: Down =====
-Deuterated Silane (SiD4) is out.  Expected bottle delivery week of May 30th.
-// [[User:John d|John d]] 09:28, 25 May 2022 (PDT)
-===== New EBL Rates =====
+=====ICP1 Down=====
+The board we were waiting on arrived, but it did not resolve the tool issue. We are working with Panasonic on the next steps.
-Effective Dec.1, 2021, all of our electron beam lithography rates are lowered.  The new rates are as follows:
+//[[User:Mehalana v|Vraj Mehalana]] 14:17, 1 March 2024 (PST)
+=====Lab Access Changes: Symmetry App=====
-Industrial Users:  $405/hour
+Card/Iris scanner access is still currently enabled.  However we will be moving to a smartphone-based access system.  '''IMPORTANT''': check your email to setup the new smartphone access system, so you will be ready when we switch to the new system. Look for an email titled '''''"Invitation to Access Symmetry App"'''''.
+// [[User:John d|John d]] 13:49, 7 November 2023 (PST)
+=====Wafer Bonder, (Suss SB6-8E)=====
-UC Academic Users:  $126/hour
+SUSS aims to be on site in early February.  We’ll will send out an email once I get confirmation for a specific date.
+//[[User:Mehalana v|Vraj Mehalana]] 14:23, 13 December 2023 (PST)
+<!--
-Non-UC Academic Users:  $150/hour
+SEE THE BOTTOM OF THIS PAGE FOR DETAILED INSTRUCTIONS ON ADDING NEWS ITEMS.
+In order for your post to show up correctly, you need to:
-UCSB CNSI Incubator USers:  $260/hour
+>> Use FIVE equal-signs for the Title's heading level.  eg.: ===== my post =====
+>> Use two slashes // and FOUR tilde's to insert your signature at the end of your post: //~~~~
-//[[User:Thibeault|Thibeault]] 12:21, 9 December 2021 (PST)
+-->
-<!---------- end of Equipment Status ------------>
+<!---------DO NOT EDIT BELOW THIS LINE----------->
-<!---------------------------------------------->
 <endfeed />
 <noinclude>[[Category:Templates]]</noinclude>
 <!--------------------------------------------
+====== HOW TO ADD ITEMS ======
-====== HOW TO ADD NEWS ITEMS ======
 * You can copy/paste the example below for a new news item.
 * Use level 5 heading for each item (5 equal signs surrounding the title) - they will show up as separate RSS items this way.  (This looks best on the Wiki homepage)
-* You must add a user signature at the end of each post via four tildes: ~~~~. Required for the RSS plugin to determine the timestamp, or else post goes to the end of the RSS feed.
+* You must add a user signature at the end of each post via four tildes: [[User:Silva|Silva]] 13:26, 4 February 2023 (PST). Required for the RSS plugin to determine the timestamp, or else post goes to the end of the RSS feed.
 * Use double-slash:   //   at start of new lines - makes display on the Samsung Display look a lot better, since it strips newlines.
 * Optional: After saving the page, delete the name after the two dashes "--" and delete the "[[(talk)...]]" link.
@@ Line 77: / Line 65: @@
 ===== NanoFab making LN2 icecream =====
 Tomorrow the NanoFab will be serving liquid nitrogen ice cream.
+// [[User:Silva|Silva]] 13:26, 4 February 2023 (PST)
-// ~~~~
 ************* (end of example) **************
-The ~~~~ will be replaced with your username & timestamp after you submit the post.
+The [[User:Silva|Silva]] 13:26, 4 February 2023 (PST) will be replaced with your username & timestamp after you submit the post.
 ---------------------------------------------->