Difference between revisions of "Template:Announcements"

Revision as of 13:42, 9 May 2024

Atomic Force Microscope (Dimension ICON) - 05/08: AFM Head needs repair

I will have to take the AFM head unit back to Bruker for repair. The height sensor failed all the tests I tried so the Z-piezo/strain gauge unit will most likely need to be replaced. SO for the foreseeable future, the AFM is down.--Demis

//Vraj Mehalana 13:42, 9 May 2024 (PDT)

MA6 TSA is down - Update

Still waiting on a quote and lead time for the board we need for the TSA microscope issue, was supposed to have that info yesterday. I've just pinged them and will provide everyone with an update once I have something.

//Vraj Mehalana 11:15, 1 May 2024 (PDT)

Velion FIB Tool DOWN

Raith service are installing and aligning a new GaBiLi source. The Velion FIB column is not available to users until further notice.

//Vraj Mehalana 10:58, 30 April 2024 (PDT)

ASML optics replacement May 20th-22nd

We will be performing beam delivery optics replacement on Mon May 20th to 22nd, to resolve a low intensity reading. The tool will be unavailable during this time.e.

//Vraj Mehalana 09:40, 9 May 2024 (PDT)

ICP1 Down

The board we were waiting on arrived, but it did not resolve the tool issue. We are working with Panasonic on the next steps. //Vraj Mehalana 14:17, 1 March 2024 (PST)

Lab Access Changes: Symmetry App

Card/Iris scanner access is still currently enabled. However we will be moving to a smartphone-based access system. IMPORTANT: check your email to setup the new smartphone access system, so you will be ready when we switch to the new system. Look for an email titled "Invitation to Access Symmetry App". // John d 13:49, 7 November 2023 (PST)

Wafer Bonder, (Suss SB6-8E)

SUSS aims to be on site in early February. We’ll will send out an email once I get confirmation for a specific date. //Vraj Mehalana 14:23, 13 December 2023 (PST)

@@ Line 1: / Line 1: @@
 <startfeed />
+=====Atomic Force Microscope (Dimension ICON) - 05/08: AFM Head needs repair=====
-<!--feedBurner name="UCSBNanofab-Announcements" /-->
+I will have to take the AFM head unit back to Bruker for repair. The height sensor failed all the tests I tried so the Z-piezo/strain gauge unit will most likely need to be replaced.  SO for the foreseeable future, the AFM is down.--Demis
-<!-- Description of the RSS feed -->
-'''''Important Announcements'''''
-----
-<!--
-SEE THE BOTTOM OF THIS PAGE FOR DETAILED INSTRUCTIONS ON ADDING NEWS ITEMS.
+//[[User:Mehalana v|Vraj Mehalana]] 13:42, 9 May 2024 (PDT)
-In order for your post to show up correctly, you need to:
+=====MA6 TSA is down - Update=====
->> Use FIVE equal-signs for the Title's heading level.  eg.: ===== my post =====
+Still waiting on a quote and lead time for the board we need for the TSA microscope issue, was supposed to have that info yesterday. I've just pinged them and will provide everyone with an update once I have something.
->> Use two slashes // and FOUR tilde's to insert your signature at the end of your post: //~~~~
--->
-<!---------------------------------------------->
-<!------------- Equipment Status ---------------->
+//[[User:Mehalana v|Vraj Mehalana]] 11:15, 1 May 2024 (PDT)
-===== New COVID protocols =====
+=====Velion FIB Tool DOWN=====
-Please read the linked letter below (on Wiki) regarding masking policy changes, effective Saturday, March 19.
+Raith service are installing and aligning a new GaBiLi source. The Velion FIB column is not available to users until further notice.
+//[[User:Mehalana v|Vraj Mehalana]] 10:58, 30 April 2024 (PDT)
-The nanofab will follow this policy with masks being optional for everyone in all sections of the facility beginning March 19.
+=====ASML optics replacement May 20th-22nd=====
-All users must adhere to the campus policies as outlined in the letter from Chancellor Yang, including testing where required.
+We will be performing beam delivery optics replacement on Mon May 20th to 22nd, to resolve a low intensity reading. The tool will be unavailable during this time.e.
+//[[User:Mehalana v|Vraj Mehalana]] 09:40, 9 May 2024 (PDT)
-Link: [https://t.e2ma.net/message/opq87n/0equghb March 16th 2022- Letter from Office of the Chancellor]
+=====ICP1 Down=====
-See the full policies at '''[[COVID-19_User_Policies]]'''
+The board we were waiting on arrived, but it did not resolve the tool issue. We are working with Panasonic on the next steps.
-// [[User:John d|John d]] 16:08, 21 March 2022 (PDT)
+//[[User:Mehalana v|Vraj Mehalana]] 14:17, 1 March 2024 (PST)
-===== LEXT Confocal: DOWN =====
+=====Lab Access Changes: Symmetry App=====
+Card/Iris scanner access is still currently enabled.  However we will be moving to a smartphone-based access system.  '''IMPORTANT''': check your email to setup the new smartphone access system, so you will be ready when we switch to the new system. Look for an email titled '''''"Invitation to Access Symmetry App"'''''.
-LEXT Confocal microscope is down, please check email for updates.
-// [[User:John d|John d]] 16:08, 21 March 2022 (PDT)
+// [[User:John d|John d]] 13:49, 7 November 2023 (PST)
-===== DUV Scope: Vis only =====
+=====Wafer Bonder, (Suss SB6-8E)=====
+SUSS aims to be on site in early February.  We’ll will send out an email once I get confirmation for a specific date.
-The DUV camera on the DUV Microscope has failed, and can not be replaced/repaired. The microscope is up as a digital visible microscope only.
-// [[User:John d|John d]] 14:08, 23 March 2022 (PDT)
+//[[User:Mehalana v|Vraj Mehalana]] 14:23, 13 December 2023 (PST)
+<!--
-===== New EBL Rates =====
+SEE THE BOTTOM OF THIS PAGE FOR DETAILED INSTRUCTIONS ON ADDING NEWS ITEMS.
-Effective Dec.1, 2021, all of our electron beam lithography rates are lowered.  The new rates are as follows:
+In order for your post to show up correctly, you need to:
+>> Use FIVE equal-signs for the Title's heading level.  eg.: ===== my post =====
-Industrial Users:  $405/hour
+>> Use two slashes // and FOUR tilde's to insert your signature at the end of your post: //~~~~
+-->
-UC Academic Users:  $126/hour
+<!---------DO NOT EDIT BELOW THIS LINE----------->
-Non-UC Academic Users:  $150/hour
-UCSB CNSI Incubator USers:  $260/hour
-//[[User:Thibeault|Thibeault]] 12:21, 9 December 2021 (PST)
-<!---------- end of Equipment Status ------------>
-<!---------------------------------------------->
 <endfeed />
 <noinclude>[[Category:Templates]]</noinclude>
 <!--------------------------------------------
+====== HOW TO ADD ITEMS ======
-====== HOW TO ADD NEWS ITEMS ======
 * You can copy/paste the example below for a new news item.
 * Use level 5 heading for each item (5 equal signs surrounding the title) - they will show up as separate RSS items this way.  (This looks best on the Wiki homepage)
-* You must add a user signature at the end of each post via four tildes: ~~~~. Required for the RSS plugin to determine the timestamp, or else post goes to the end of the RSS feed.
+* You must add a user signature at the end of each post via four tildes: [[User:Silva|Silva]] 13:26, 4 February 2023 (PST). Required for the RSS plugin to determine the timestamp, or else post goes to the end of the RSS feed.
 * Use double-slash:   //   at start of new lines - makes display on the Samsung Display look a lot better, since it strips newlines.
 * Optional: After saving the page, delete the name after the two dashes "--" and delete the "[[(talk)...]]" link.
@@ Line 74: / Line 56: @@
 ===== NanoFab making LN2 icecream =====
 Tomorrow the NanoFab will be serving liquid nitrogen ice cream.
+// [[User:Silva|Silva]] 13:26, 4 February 2023 (PST)
-// ~~~~
 ************* (end of example) **************
-The ~~~~ will be replaced with your username & timestamp after you submit the post.
+The [[User:Silva|Silva]] 13:26, 4 February 2023 (PST) will be replaced with your username & timestamp after you submit the post.
 ---------------------------------------------->