Difference between revisions of "MLA150 - Large Image GDS Generation"

From UCSB Nanofab Wiki
Jump to navigation Jump to search
(pasted method)
m
 
Line 4: Line 4:
  
 
==== Procedure ====
 
==== Procedure ====
'''[https://www.gimp.org/ GIMP]:''' (can also do in another image editor, such as Paint.exe)
+
 
 +
'''1)''' In '''[https://www.gimp.org/ GIMP]:''' (can also do in another image editor, such as Paint.exe)
  
 
open the Image (JPG, PNG, BMP etc.),  
 
open the Image (JPG, PNG, BMP etc.),  
Line 16: Line 17:
 
Save as any JPG, PNG, BMP format
 
Save as any JPG, PNG, BMP format
  
'''[https://inkscape.org/ Inkscape]:'''
+
'''2)''' In '''[https://inkscape.org/ Inkscape]:'''
  
 
Open the Image file, default options
 
Open the Image file, default options
Line 46: Line 47:
 
> UNCHECK "Robo" and "LWPOLYLINE" - important, or the lines won’t be connected as a single object.
 
> UNCHECK "Robo" and "LWPOLYLINE" - important, or the lines won’t be connected as a single object.
  
'''[https://www.klayout.de/ Klayout]:'''
+
'''3)''' In '''[https://www.klayout.de/ Klayout]:'''
  
 
Open the DXF in Klayout
 
Open the DXF in Klayout
Line 60: Line 61:
 
Take note of which Cell & Layer should be printed
 
Take note of which Cell & Layer should be printed
  
'''MLA:'''
+
'''4)''' On the '''MLA:'''
  
 
[Convert Design] and Import the GDS,  
 
[Convert Design] and Import the GDS,  

Latest revision as of 11:27, 5 February 2021

Instructions on how to take a regular rasterized image (eg. JPG, BMP, PNG etc.) and convert it into a vectorized format compatible with the MLA150. This produces a much smaller file than a raw BMP image, because large-area polygons are created, as opposed to the BMP file defining each ~4µm pixel across a 150mm wafer (which hits the RAM limit on the computer).

In this example, we convert the image into a 1-bit black-and-white image using the free software GIMP, and then convert to a Vector format using the free software InkScape. Then we correct the scale and convert to GDS using the free software KLayout., which is then ready for exposure on the MLA.

Procedure

1) In GIMP: (can also do in another image editor, such as Paint.exe)

open the Image (JPG, PNG, BMP etc.),

Image > Mode > Indexed > 1-bit

Optional: Dither to handle grey values, haven't tried this.

Can edit by painting etc.

Save as any JPG, PNG, BMP format

2) In Inkscape:

Open the Image file, default options

Click on the Image with the Arrow tool, to select it.

Path > Trace Bitmap (options affect curves/resolution)

- Use the “Update” button to show a Preview of the Path that will be created.

- Options: Trace BitMap > Single-Scan > AutoTrace (dropdown menu).  

- [OK] to create the Path, then Close the “Trace Bitmap” window.

- Creates a new Path object that outlines the image

Use the Arrow select tool to select the Image

- bottom bar shows what object is selected

- Option/Alt-Click to select obscured objects

- Make sure PATH is Not selected

Delete the Image.  File should have only the Path object in it.

File > Save a Copy… > DXF (Autocad R14)

> UNCHECK "Robo" and "LWPOLYLINE" - important, or the lines won’t be connected as a single object.

3) In Klayout:

Open the DXF in Klayout

Use Cell Instance to scale up to desired size:

  • Create a new Cell
  • Instance the original Cell into that.
  • Edit Cell Instance properties to adjust scaling

Use Move tool to Center image at 0,0

Save as GDS

  • Change file extension to lower case “gds” important, or MLA convert software won’t see the file.

Take note of which Cell & Layer should be printed

4) On the MLA:

[Convert Design] and Import the GDS,

Choose correct Cell from dropdown

Set correct Layer: set 1st line to correct layer & uncheck the others

[Viewer] to make sure scale is correct

Ready to expose the pattern as normal.