Difference between revisions of "Stepper 3 (ASML DUV)"

From UCSB Nanofab Wiki
Jump to: navigation, search
(About)
(About)
Line 17: Line 17:
   
 
Resists Used:
 
Resists Used:
UV210-0.3 - Positive: 300nm nominal thickness
+
* UV210-0.3 - Positive: 300nm nominal thickness
UV6-0.8 - Positive: 800nm nominal thickness
+
* UV6-0.8 - Positive: 800nm nominal thickness
PEK162C - Positive: 2.5um nominal thickness
+
* PEK162C - Positive: 2.5um nominal thickness
UVN2300-0.5 - Negative: 500nm nominal thickness
+
* UVN2300-0.5 - Negative: 500nm nominal thickness
   
AR2/DUV42P-6/DS-K101: Anti-Reflective Coatings
+
* AR2/DUV42P-6/DS-K101: Anti-Reflective Coatings
PMGI: Underlayer
+
* PMGI: Underlayer
   
 
AZ300MIF Developer for all processes
 
AZ300MIF Developer for all processes
 
See Lithography Process page for details, where available
 
   
 
= Process Information =
 
= Process Information =

Revision as of 14:33, 3 June 2016

Stepper 3 (ASML DUV)
ASML.jpg
Tool Type Lithography
Location Bay 3
Supervisor Brian Thibeault
Supervisor Phone (805) 893-2268
Supervisor E-Mail thibeault@ece.ucsb.edu
Description ASML PAS 5500/300 DUV Stepper
Manufacturer ASML
Sign up for this tool



About

The ASML 5500 stepper is a 248nm DUV stepper for imaging dense features down to below 200nm and isolated line structures down to below 150nm. The full field useable exposure area is limited to the intersection of a 31mm diameter circle and a rectangle of dimensions 22mm x 27mm. The system has a variable NA system and has a square field image size of 21 x 21mm for 0.63 NA and a square field image size of 22mm x 22mm for 0.4 to 0.57 NA. Other rectangular sizes available: 21mm x 23mm; 20mm x 24mm; 19mm x 25mm; 18mm x 25.5mm; 17mm x 26mm; 16mm x 26.5mm; 15mm x 27mm. Overlay accuracy is better than 30nm. The system is configured for 4” wafers and, with staff support, mounted pieces down to 14mm in size can be exposed using a 4” wafer as a carrier.

Resists Used:

  • UV210-0.3 - Positive: 300nm nominal thickness
  • UV6-0.8 - Positive: 800nm nominal thickness
  • PEK162C - Positive: 2.5um nominal thickness
  • UVN2300-0.5 - Negative: 500nm nominal thickness
  • AR2/DUV42P-6/DS-K101: Anti-Reflective Coatings
  • PMGI: Underlayer

AZ300MIF Developer for all processes

Process Information

Service Provider

Operating Procedures