Difference between revisions of "Spin Rinse Dryer (SemiTool)"
Jump to navigation
Jump to search
(Created page with "{{tool|{{PAGENAME}} |picture=SpinRinse.jpg |type = Wet Processing |super= Don Freeborn |location=Bay 7 |description = ? |manufacturer = SemiTool }}") |
m (tool template @ top) |
||
(One intermediate revision by the same user not shown) | |||
Line 7: | Line 7: | ||
|manufacturer = SemiTool |
|manufacturer = SemiTool |
||
}} |
}} |
||
+ | |||
+ | Two Spin-Rinse Dryers are available, one for 4-inch wafers and one for 6-inch wafers. |
||
+ | |||
+ | Each has a dedicated cassette that can hold up to 25 wafers. |
||
+ | |||
+ | The tool is set up to rinse at ~1000 rpm while spraying DI water, and then Dry in nitrogen at ~2000 rpm. A "Dry Only" option is also available. |
Revision as of 17:13, 7 September 2017
|
Two Spin-Rinse Dryers are available, one for 4-inch wafers and one for 6-inch wafers.
Each has a dedicated cassette that can hold up to 25 wafers.
The tool is set up to rinse at ~1000 rpm while spraying DI water, and then Dry in nitrogen at ~2000 rpm. A "Dry Only" option is also available.