Difference between revisions of "ICP Etch 2 (Panasonic E626I)"

From UCSB Nanofab Wiki
Jump to navigation Jump to search
m (John d moved page ICP Etch 2 (Panasonic E640) to ICP Etch 2 (Panasonic E626I): Corrected model number)
 
(22 intermediate revisions by 5 users not shown)
Line 1: Line 1:
−
{{tool|{{PAGENAME}}
 +
{{tool2|{{PAGENAME}}
 
|picture=ICP1.jpg
  
|picture=ICP1.jpg
 
|type = Dry Etch
  
|type = Dry Etch
−
|super= Mike Silva
 +
|super= Tony Bosch
  +
|super2= Don Freeborn
 
|phone=(805)839-3918x219
  
|phone=(805)839-3918x219
 
|location=Bay 2
  
|location=Bay 2
 
|email=silva@ece.ucsb.edu
  
|email=silva@ece.ucsb.edu
−
|description = ?
 +
|description = ICP Etch
 
|manufacturer = Panasonic Factory Solutions
 
|manufacturer = Panasonic Factory Solutions
  +
|model= E626I
 
|materials =
 
|materials =
 
|toolid=23
  
|toolid=23
 
}}
 
}}
−
= About =
 +
==About==
   
−
This is a single-chamber tool for etching of a variety of materials. The chamber is configured as an ICP etching tool with 1000 W ICP power, 500 W RF substrate power, and RT - 80°C operation with back-side He cooling and an electrostatic chuck to maintain controlled surface temperatures during etching. This chamber has Cl<sub>2</sub>, BCl<sub>3</sub>, CF<sub>4</sub>, CHF<sub>3</sub>, SF<sub>6</sub>, Ar, N<sub>2</sub>, and O<sub>2 </sub>for gas sources and can be used to etch a variety of materials from SiO<sub>2</sub> to metals to compound semiconductors. The chamber evacuated with a 2000 lpm Osaka Vacuum magnetically levitated turbo pump, allowing for fast pump down.
 +
This is a single-chamber tool for etching of a variety of materials. The chamber is configured as an ICP etching tool with 1000 W ICP power, 500 W RF substrate power, and RT - 80°C operation with back-side He cooling and an electrostatic chuck to maintain controlled surface temperatures during etching. This chamber has Cl<sub>2</sub>, BCl<sub>3</sub>, CF<sub>4</sub>, CHF<sub>3</sub>, SF<sub>6</sub>, Ar, N<sub>2</sub>, and O<sub>2 </sub>for gas sources and can be used to etch a variety of materials from SiO<sub>2</sub> to metals to compound semiconductors. The chamber is evacuated with a 2000 lpm Osaka Vacuum magnetically levitated turbo pump, allowing for fast pump down.
   
  +
The system is also equipped with a red laser monitoring system from Intellemetrics for more precise etch stop control.
⚫
= Detailed Specifications =
  
   
  ⚫
==Detailed Specifications==
⚫
*1000 W ICP source, 500 W RF Sample Bias Source in etching chamber
 
  +
⚫
*RT - 80°C sample temperature for etching
 
  ⚫
*1000 W ICP source, 500 W RF Sample Bias Source in etching chamber
⚫
*Optimal Emission Monitoring
 
  ⚫
*Room Temp. – 80°C sample temperature for etching. Default 15°C Chuck temperature.
⚫
*Etch pressure from 0.1 Pa to 5 Pa (0.75 mT - 37.5 mT)
 
  ⚫
*Optimal Emission Monitoring
⚫
*Cl<sub>2</sub>, BCl<sub>3</sub>, CF<sub>4</sub>, CHF<sub>3</sub>, SF<sub>6</sub>, Ar, N<sub>2</sub>, and O<sub>2</sub> in etch chamber
  
  ⚫
*Etch pressure from 0.1 Pa to 5 Pa (0.75 mT - 37.5 mT)
⚫
*O<sub>2</sub>, N<sub>2</sub>, CF<sub>4</sub>, H<sub>2</sub>O Vapor for ashing chamber
 
  ⚫
*Cl<sub>2</sub>, BCl<sub>3</sub>, (Ar or CHF<sub>3</sub>), (CF<sub>4</sub> or SF<sub>6</sub>), N<sub>2</sub>, and O<sub>2</sub> in etch chamber
⚫
*Single 6” diameter wafer capable system
 
  ⚫
*O<sub>2</sub>, N<sub>2</sub>, CF<sub>4</sub>, H<sub>2</sub>O Vapor for ashing chamber
  ⚫
*Single 6” diameter wafer capable system
 
*Pieces possible by mounting to 6” wafer
  
*Pieces possible by mounting to 6” wafer
  +
*670nm laser endpoint detector with camera and simulation software: [[Laser Etch Monitoring|Intellemetrics LEP 500]]
  +
  ⚫
==Documentation==
   
⚫
=Documentation=
  
 
*{{file|ICP-Etch-2-Operating-Manual.pdf|Operating Instruction Manual}}
  
*{{file|ICP-Etch-2-Operating-Manual.pdf|Operating Instruction Manual}}
 
*{{file|Panasonic2.pdf|Training Notes}}
  
*{{file|Panasonic2.pdf|Training Notes}}
 
*{{file|Gas-Change.pdf|Gas Change Instructions}}
  
*{{file|Gas-Change.pdf|Gas Change Instructions}}
 
*{{file|manualwafertransfer.pdf|Manual Wafer Transfer Instructions}}
  
*{{file|manualwafertransfer.pdf|Manual Wafer Transfer Instructions}}
  +
*[[Laser Etch Monitoring|Laser Etch Monitor procedures]]
  +
  +
===Online Training Video===
  +
  +
*[https://gauchocast.hosted.panopto.com/Panopto/Pages/Viewer.aspx?id=8b676980-1c9a-420c-a2e5-ac180139939d <u>Panasonic ICP#2 Training Video</u>]
  +
*'''Important:''' ''This video is for reference only, and does not give you authorization to use the tool. You must be officially authorized by the supervisor before using this machine.''
  +
  +
==Recipes==
  +
  +
*'''Recipes > Dry Etch >''' [https://wiki.nanotech.ucsb.edu/w/index.php?title=ICP_Etching_Recipes#ICP_Etch_2_.28Panasonic_E640.29 '''<u>ICP2 Etching Recipes</u>''']
  +
**Starting point recipes for ICP2 specifically.
  +
*[[ICP Etching Recipes#Process Control Data .28Panasonic 2.29|Process Control Data]]
  +
**Historical Data records "calibration" etches to test tool performance.
  +
  +
*'''Recipes > [https://wiki.nanotech.ucsb.edu/w/index.php?title=Dry_Etching_Recipes <u>Dry Etching Recipes</u>]'''
  +
**Table of all dry etching recipes, showing '''etched materials vs. tool''' etc.

Latest revision as of 15:19, 7 February 2024

ICP Etch 2 (Panasonic E626I)
ICP1.jpg
Location Bay 2
Tool Type Dry Etch
Manufacturer Panasonic Factory Solutions
Model E626I
Description ICP Etch
Primary Supervisor Tony Bosch
(805) 893-3486
bosch@ece.ucsb.edu

Secondary Supervisor

Don Freeborn

Recipes Dry Etch RecipesN/A
SignupMonkey: Sign up for this tool


About

This is a single-chamber tool for etching of a variety of materials. The chamber is configured as an ICP etching tool with 1000 W ICP power, 500 W RF substrate power, and RT - 80°C operation with back-side He cooling and an electrostatic chuck to maintain controlled surface temperatures during etching. This chamber has Cl2, BCl3, CF4, CHF3, SF6, Ar, N2, and O2 for gas sources and can be used to etch a variety of materials from SiO2 to metals to compound semiconductors. The chamber is evacuated with a 2000 lpm Osaka Vacuum magnetically levitated turbo pump, allowing for fast pump down.

The system is also equipped with a red laser monitoring system from Intellemetrics for more precise etch stop control.

Detailed Specifications

  • 1000 W ICP source, 500 W RF Sample Bias Source in etching chamber
  • Room Temp. – 80°C sample temperature for etching. Default 15°C Chuck temperature.
  • Optimal Emission Monitoring
  • Etch pressure from 0.1 Pa to 5 Pa (0.75 mT - 37.5 mT)
  • Cl2, BCl3, (Ar or CHF3), (CF4 or SF6), N2, and O2 in etch chamber
  • O2, N2, CF4, H2O Vapor for ashing chamber
  • Single 6” diameter wafer capable system
  • Pieces possible by mounting to 6” wafer
  • 670nm laser endpoint detector with camera and simulation software: Intellemetrics LEP 500

Documentation

Online Training Video

  • Panasonic ICP#2 Training Video
  • Important: This video is for reference only, and does not give you authorization to use the tool. You must be officially authorized by the supervisor before using this machine.

Recipes

  • Recipes > Dry Etching Recipes
    • Table of all dry etching recipes, showing etched materials vs. tool etc.
Retrieved from "https://wiki.nanofab.ucsb.edu/w/index.php?title=ICP_Etch_2_(Panasonic_E626I)&oldid=161839"