Difference between revisions of "Automated Coat/Develop System (S-Cubed Flexi)"

From UCSB Nanofab Wiki
Jump to navigation Jump to search
m (edit staff use notice)
m (ToolTemplate: model & mfg. link)
Line 5: Line 5:
 
|location=Bay 7
  
|location=Bay 7
 
|description = Automatic Coat/Bake/Develop
  
|description = Automatic Coat/Bake/Develop
−
|manufacturer = S-Cubed
 +
|manufacturer = [https://www.s-cubed.com S-Cubed]
  +
|model = Flexi (Custom)
 
|ToolType = Wet Processing
  
|ToolType = Wet Processing
 
|recipe = Lithography
  
|recipe = Lithography

Revision as of 16:16, 8 October 2019

Automated Coat/Develop System (S-Cubed Flexi)
TBD.jpg
Tool Type Lithography
Location Bay 7
Supervisor Tony Bosch
Supervisor Phone (805) 893-3486
Supervisor E-Mail bosch@ece.ucsb.edu
Description Automatic Coat/Bake/Develop
Manufacturer S-Cubed
Model Flexi (Custom)
Lithography Recipes 


THIS TOOL IS ONLY FOR STAFF USE AT THIS TIME.

About

To Be Added

Detailed Specifications

  • Wafer Size: 100mm (150mm possible but not set up)
  • PR Coating Properties:
    • Uniformity < 1.0%
    • < 100 particles on 100mm wafer
  • Photoresists/Underlayers Available:
    • UV6-0.8
    • DS-K101-304
    • PMMA
    • PMGI SF11
    • PMGI SF5
  • Solvents Available:
    • EBR100
  • Developers Available:
    • AZ 300 MiF

Process Information

Operating Procedures

  • To Be Added
Retrieved from "https://wiki.nanofab.ucsb.edu/w/index.php?title=Automated_Coat/Develop_System_(S-Cubed_Flexi)&oldid=156860"