Difference between revisions of "YES-150C-Various-Resists"

From UCSB Nanofab Wiki
Jump to navigation Jump to search
(minor edit spelling)
(Text replacement - "/wiki/index.php" to "/w/index.php")
 
(5 intermediate revisions by 2 users not shown)
Line 1: Line 1:
Pressure drop indicates completion of etch. Once pressure flattens etching is complete. 
+
Pressure drop indicates completion of etch.  
  
[[File:YES150CResists.jpg]]
+
Once pressure flattens etching is complete. 
 +
 
 +
There is uncertainty in the exact completion time, somewhere between the peak pressure and the point where it goes flat.  Using known PR thicknesses (spun at standard spin speeds - see the [https://wiki.nanotech.ucsb.edu/w/index.php?title=Lithography_Recipes#PositivePR datasheets]) you can estimate etch rate from these plots. 
 +
 
 +
[[File:YES150CResists.jpg|660x660px]]

Latest revision as of 12:51, 4 September 2021

Pressure drop indicates completion of etch.

Once pressure flattens etching is complete.

There is uncertainty in the exact completion time, somewhere between the peak pressure and the point where it goes flat. Using known PR thicknesses (spun at standard spin speeds - see the datasheets) you can estimate etch rate from these plots.

YES150CResists.jpg