Test Data of etching SiO2 with CHF3/CF4-ICP1

ICP#1 Recipe: 0.5Pa, 50/900W, CHF3/CF4=10/30 sccm, time=210 sec

Date	Sample#	Etch Rate (nm/min)	Etch Selectivity (SiO2/PR)	Averaged Sidewall Angle (o)	SEM Images
1/28/2019	I11901	110	1.35	see SEM →	[1]
5/29/2019	I11903	105	1.41		[2]
1/13/2020	I12001	78.0	1.06	unusual - two regions	[3]
Rate on 1/13/2020 is low by ~20%, so chamber was wet-cleaned on 1/21/2020. Data below for 1/23 shows rate returned to "normal".
1/23/2020	I12002	109	1.16		[4]
2/28/2020	I12003	119	1.17	56.6	[5]
Sidewall profile on 2/28/2020 etches is slanted, chamber will be wet-cleaned on 3/2/2020 and re-tested. Data below shows etch returned to "normal".
3/3/2020	I12004	110	1.05		[6]
1/7/2021	I12101	118	1.12		[7]

OLD Etch Test Data

Alternate SiO₂ etch recipe with O2 included.

ICP#1: 0.5Pa, 50/500W, CHF3/CF4/O2=35/5/10sccm, time=210 sec
Date	Sample#	Etch Rate (nm/min)	Etch Selectivity (SiO2/PR)	Averaged Sidewall Angle (o)	SEM Images
1/28/2019	I11902	78.1	0.63		[8]
5/29/2019	I11904	71.1	0.58		[9]