Difference between revisions of "Template:Announcements"

Revision as of 17:01, 21 October 2021

Equipment Status

GCA Autostep and 6300 October Maintenance

The vendor will be here October 25 until October 28 to service both steppers. The Autostep will be Monday thru Wednesday from 8am until 6pm. The 6300 will be serviced on Thursday from 8am until 6pm. Silva 08:39, 12 October 2021 (PDT)

Oxford ICP Installed

A new ICP etcher for III-V etches (GaAs, InP, GaN) has been installed: Oxford_ICP_Etcher_(PlasmaPro_100_Cobra)

Contact the supervisor for training. // John d 08:00, 30 September 2021 (PDT)

New COVID Protocols

All facility users and visitors are now required to have masks on while indoors in shared spaces. This includes shared offices, hallways/corridors, and all shared laboratory spaces. Masks will be worn in all laboratories at all times and in all shared office spaces at all times.

This direction applies to all vaccinated and non-vaccinated persons.

Outdoor policies remain unchanged

Surgical style masks or KN95 masks are appropriate for cleanroom use. Cloth masks may be used in non-cleanroom spaces.

See the full policies at COVID-19_User_Policies

// Hopkins a 08:14, 6 August 2021 (PDT)

Weekly Testing strongly urged for UCSB Students/Staff

Free weekly COVID testing is available to UCSB Staff, Faculty and Students. UCSB employees are strongly urged to sign up for weekly testing, which takes only minutes, is administered on-campus and is free of charge.

Weekly recurring appointments can be made at the Student Health website:

Log on to the UCSB Testing Patient Portal using your UCSB NetID and password.

The Chancellor's memo to campus with details can be found here. // John d 06:20, 16 November 2020 (PST)

NanoFab COVID Protocols

The most recent COVID Protocols can be found at COVID-19_User_Policies.

// John d 15:00, 19 July 2020 (PDT)

@@ Line 2: / Line 2: @@
 <!--feedBurner name="UCSBNanofab-Announcements" /-->
 <!-- Description of the RSS feed -->
+'''''Equipment Status'''''
-''UCSB NanoFab Announcements''
+----
 <!--
+SEE THE BOTTOM OF THIS PAGE FOR DETAILED INSTRUCTIONS ON ADDING NEWS ITEMS.
-'''How to add new news items'''
+In order for your post to show up correctly, you need to:
-* Use level 5 heading for each item - they will show up as separate RSS items this way.  (looks best on the Wiki homepage)
+>> Use FIVE equal-signs for the Title's heading level.  eg.: ===== my post =====
-* You must add a user signature at the end of each post via four tildes: ~~~~, then after saving the page, delete the name after the two dashes "--" and delete the "[[(talk)...]]" link. Most recent date shows up at the top.
+>> Use two slashes // and FOUR tilde's to insert your signature at the end of your post: //~~~~
-* "There are no announcements at this time." should be used to indicate when empty.
-* Use double-slash at start of new lines - makes display on the Samsung Display look a lot better.
 -->
 <!---------------------------------------------->
-<!------------- Announcements ---------------->
+<!------------- Equipment Status ---------------->
-===== EBeam #4: Down =====
-kV Power supply won't stay on.  Currently working with vendor to fix.
-// [[User:John d|Posted:]] 17:27, 26 February 2018 (PST)
-===== PECVD #2: High Particulates =====
+===== GCA Autostep and 6300 October Maintenance =====
+The vendor will be here October 25 until October 28 to service both steppers. The Autostep will be Monday thru Wednesday from 8am until 6pm. The 6300 will be serviced on Thursday from 8am until 6pm.
-We appear to have a major particulate issue on PECVD2 right now that was just identified.  If you are sensitive to particles, please do not use the system.
-// [[User:John d|Posted:]] 17:01, 23 February 2018 (PST)
+[[User:Silva|Silva]] 08:39, 12 October 2021 (PDT)
-===== Stepper #2 Maintenance =====
+===== Oxford ICP Installed =====
+A new ICP etcher for III-V etches (GaAs, InP, GaN) has been installed: [[Oxford_ICP_Etcher_(PlasmaPro_100_Cobra)]]
-The vendor will be servicing the GCA Autostep on Thursday March 15, 2018 at 8:00AM. The system will be up and running later that afternoon. Please plan your process accordingly.
-// [[User:John d|Posted:]] 07:40, 21 February 2018 (PST)
+Contact [[Tony_Bosch | the supervisor]] for training.
-===== Stepper #1 Maintenance =====
+// [[User:John d|John d]] 08:00, 30 September 2021 (PDT)
-The vendor will be here to service the GCA 6300 starting Monday March 12, 2018 at 8:00AM. The system will be down for three days for this service. We will send out an email if the service is completed before expected. Please plan your process accordingly.
-// [[User:John d|Posted: ]] 07:40, 21 February 2018 (PST)
-===== JEOL SEM #2: Up =====
+===== New COVID Protocols =====
+All facility users and visitors are now required to have masks on while indoors in shared spaces.  This includes shared offices, hallways/corridors, and all shared laboratory spaces.  Masks will be worn in all laboratories at all times and in all shared office spaces at all times.
-System up, loadlock fixed.
-// [[User:John d|Posted:]] 15:48, 23 February 2018 (PST)
+This direction applies to all vaccinated and non-vaccinated persons.
-===== Gasonics: Up =====
-The process chamber mechanical pump is struggling to make base pressure but the system is able to successfully run. We are waiting for the replacement pump to be repaired and returned.
-// [[User:John d|Posted:]] 10:14, 12 February 2018 (PST)
+Outdoor policies remain unchanged
-===== Cary 500 Down =====
-UV-Vis Detector Failure. Tool is able to used from 600nm and up. Looking into replacement options.
-// [[User:John d|Posted:]] 13:47, 12 February 2018 (PST)
+Surgical style masks or KN95 masks are appropriate for cleanroom use.  Cloth masks may be used in non-cleanroom spaces.
-===== Testing =====
-RSS Testing Testing 123. Signature with 5 tildes (timestamp only)
+See the full policies at [[COVID-19_User_Policies]]
-// 17:29, 26 February 2018 (PST)
-<!---------- end of announcements ------------>
+// [[User:Hopkins a|Hopkins a]] 08:14, 6 August 2021 (PDT)
+===== Weekly Testing strongly urged for UCSB Students/Staff =====
+Free weekly COVID testing is available to UCSB Staff, Faculty and Students. UCSB employees are strongly urged to sign up for weekly testing, which takes only minutes, is administered on-campus and is free of charge.
+Weekly recurring appointments can be made at the Student Health website:
+* Log on to the [https://studenthealthoc.sa.ucsb.edu/login_dualauthentication.aspx '''UCSB Testing Patient Portal'''] using your UCSB NetID and password.
+The Chancellor's [https://chancellor.ucsb.edu/memos/2020-10-15-recommended-covid-19-asymptomatic-campus-testing-program-faculty-staff-and memo to campus with details can be found here].
+// [[User:John d|John d]] 06:20, 16 November 2020 (PST)
+===== NanoFab COVID Protocols =====
+''The most recent COVID Protocols can be found at '''[[COVID-19_User_Policies]]'''.''
+// [[User:John d|John d]] 15:00, 19 July 2020 (PDT)
+<!---------- end of Equipment Status ------------>
 <!---------------------------------------------->
 <endfeed />
 <noinclude>[[Category:Templates]]</noinclude>
+<!--------------------------------------------
+====== HOW TO ADD NEWS ITEMS ======
+* You can copy/paste the example below for a new news item.
+* Use level 5 heading for each item (5 equal signs surrounding the title) - they will show up as separate RSS items this way.  (This looks best on the Wiki homepage)
+* You must add a user signature at the end of each post via four tildes: ~~~~. Required for the RSS plugin to determine the timestamp, or else post goes to the end of the RSS feed.
+* Use double-slash:   //   at start of new lines - makes display on the Samsung Display look a lot better, since it strips newlines.
+* Optional: After saving the page, delete the name after the two dashes "--" and delete the "[[(talk)...]]" link.
+* Please use "There are no announcements at this time." if the announcements are empty.
+* URL to the RSS feed via FeedBurner (for Samsung display): http://feeds.feedburner.com/UCSBNanofab-Announcements?format=xml
+* URL to the RSS feed directly from Wiki: https://www.nanotech.ucsb.edu/wiki/index.php?title=Template:Announcements&action=feed&feed=rss
+******** EXAMPLE OF A NEW POST ********
+===== NanoFab making LN2 icecream =====
+Tomorrow the NanoFab will be serving liquid nitrogen ice cream.
+// ~~~~
+************* (end of example) **************
+The ~~~~ will be replaced with your username & timestamp after you submit the post.
+---------------------------------------------->