Difference between revisions of "Template:Announcements"
(bench 7 heated bath update) |
|||
| Line 9: | Line 9: | ||
<!------------- Announcements ----------------> |
<!------------- Announcements ----------------> |
||
| − | ===== Solvent Bench Bay 7 - Bath |
+ | ===== Solvent Bench Bay 7 - Heated Bath ===== |
| + | I have disabled the auto refill due to a high water level. There is however a manual fill and a manual drain button at the center top of the head case. It was the old fill and drain for the ultrasonic sink that was once in the bench. So users using the bath might need to fill or drain as you put your beaker in. Please be careful with other user's beakers. |
||
| − | The Heated bath in bay 7 is up and ready to use. It is at 80 c now and has a new auto refill as well as a manual fill. Mike Day will be inspecting the bath every morning for water level, contaminated water as well as feed back from all you guys. We know there will most likely be a little fine tuning, So please give Mike Day your feed back. |
||
| − | // [[User:John d|John d]] 17: |
+ | // [[User:John d|John d]] 17:18, 6 June 2018 (PDT) |
===== RIE#5: No SiCl4 ===== |
===== RIE#5: No SiCl4 ===== |
||
Revision as of 17:18, 6 June 2018
UCSB NanoFab Announcements
Solvent Bench Bay 7 - Heated Bath
I have disabled the auto refill due to a high water level. There is however a manual fill and a manual drain button at the center top of the head case. It was the old fill and drain for the ultrasonic sink that was once in the bench. So users using the bath might need to fill or drain as you put your beaker in. Please be careful with other user's beakers. // John d 17:18, 6 June 2018 (PDT)
RIE#5: No SiCl4
We have received a new bottle of SiCl4 and we are installing a new gas panel. We will notify you when the gas is available. // John d 17:00, 4 June 2018 (PDT)
PECVD#2 is Up
The Plasma Therm Cortex software update is complete, and the system is operational. Standard recipes requalified. Particle counts are now much lower and around historical levels. All users need retraining on the new software. Contact Mike Silva for training. // Thibeault 17:25, 24 May 2018 (PDT)