Difference between revisions of "Step Profilometer (KLA Tencor P-7)"

From UCSB Nanofab Wiki
Jump to: navigation, search
(Copied from dektak page)
 
(Added page for instructions)
Line 10: Line 10:
 
|materials =
 
|materials =
 
}}
 
}}
= About =
+
== About ==
  +
The KLA Tencor info will be here
The Dektak VI is a profilometer for measuring step heights or trench depths on a surface. This is a surface contact measurement technique where a very low force stylus is dragged across a surface. The Dektak VI offers Windows based data acquisition, data analysis, and equipment control. The force of the tip on the surface is adjustable from .03 mg to 15 mg, allowing for the measuring of hard and soft surfaces. A stress measurement option is also included with this tool. The profilometer can measure to a depth of over 1 mm, allowing for direct measurement of MEMs type structures. Lateral resolution is tip-shape dependent and vertical resolution is 1A (when using the 6.55 mm range). The lateral resolution is limited by the tip shape. A video camera with variable magnification allows for manual placement of the stylus using the manual X, Y, Theta stage. Software analysis can determine roughness, average step height, etc.
 
   
=Detailed Specifications=
+
==Detailed Specifications==
  +
*More info to go here
*20 mm maximum sample thickness
 
  +
*.03 mg to 15 mg variable tip force
 
  +
== Instructions ==
*Height/Depth measurements to 1 mm
 
  +
* [[KLA Tencor P7 - Basic profile instructions|Basic profile instructions]]
*1 A vertical resolution at 6.5 um full scale
 
*Standard stylus radius is 12.5 um, optional 2 um stylus available
 
*6 inch stage diameter with manual controls for moving and leveling
 
*Software data leveling and other analysis including stress
 
*Full GUI-based Windows control and data storage and exporting capability
 

Revision as of 17:42, 10 October 2018

Step Profilometer (KLA Tencor P-7)
Dektak6M.jpg
Tool Type Inspection, Test and Characterization
Location Bay 4
Supervisor Brian Lingg
Supervisor Phone (805) 893-8145
Supervisor E-Mail lingg_b@ucsb.edu
Description Surface Profilometer
Manufacturer KLA Tencor


About

The KLA Tencor info will be here

Detailed Specifications

  • More info to go here

Instructions