Difference between revisions of "Step Profilometer (KLA Tencor P-7)"

From UCSB Nanofab Wiki
Jump to navigation Jump to search
(Copied from dektak page)
(Added page for instructions)
Line 10: Line 10:
|materials =  
|materials =  
= About  =
== About  ==
The Dektak VI is a profilometer for measuring step heights or trench depths on a surface. This is a surface contact measurement technique where a very low force stylus is dragged across a surface. The Dektak VI offers Windows based data acquisition, data analysis, and equipment control. The force of the tip on the surface is adjustable from .03 mg to 15 mg, allowing for the measuring of hard and soft surfaces. A stress measurement option is also included with this tool. The profilometer can measure to a depth of over 1 mm, allowing for direct measurement of MEMs type structures. Lateral resolution is tip-shape dependent and vertical resolution is 1A (when using the 6.55 mm range). The lateral resolution is limited by the tip shape. A video camera with variable magnification allows for manual placement of the stylus using the manual X, Y, Theta stage. Software analysis can determine roughness, average step height, etc.
The KLA Tencor info will be here
=Detailed Specifications=
==Detailed Specifications==
*20 mm maximum sample thickness
*More info to go here
*.03 mg to 15 mg variable tip force
*Height/Depth measurements to 1 mm
== Instructions ==
*1 A vertical resolution at 6.5 um full scale
* [[KLA Tencor P7 - Basic profile instructions|Basic profile instructions]]
*Standard stylus radius is 12.5 um, optional 2 um stylus available
*6 inch stage diameter with manual controls for moving and leveling
*Software data leveling and other analysis including stress
*Full GUI-based Windows control and data storage and exporting capability

Revision as of 16:42, 10 October 2018

Step Profilometer (KLA Tencor P-7)
Tool Type Inspection, Test and Characterization
Location Bay 4
Supervisor Brian Lingg
Supervisor Phone (805) 893-8145
Supervisor E-Mail lingg_b@ucsb.edu
Description Surface Profilometer
Manufacturer KLA Tencor


The KLA Tencor info will be here

Detailed Specifications

  • More info to go here