Difference between revisions of "Services"

From UCSB Nanofab Wiki
Jump to navigation Jump to search
(→‎Fabrication Services by NanoFab Staff: pasted Services text - same as the nanotech page. minor updates.)
(→‎Important Info on Fabrication Services: added link to publications policy)
 
(11 intermediate revisions by 2 users not shown)
Line 1: Line 1:
 
[[Category:Services]]
 
[[Category:Services]]
''Procedures and paperwork to '''get your students/employees''' into the NanoFab.''  
+
''Procedures and paperwork to get '''your students/employees''' into the NanoFab.''  
  
''If you are instead looking for '''fabrication services by NanoFab staff''', please see [https://www.nanotech.ucsb.edu/services#comp-k3s9okwf this page].''
+
''If you are looking for '''fabrication services by NanoFab staff''', please see [https://wiki.nanotech.ucsb.edu/wiki/Services#Fabrication_Services_by_NanoFab_Staff this section].''
  
 
Please choose the appropriate section:
 
Please choose the appropriate section:
Line 9: Line 9:
 
<!-- Table of Contents here, forced -->
 
<!-- Table of Contents here, forced -->
  
== U.C. Santa Barbara Researchers ==
+
==U.C. Santa Barbara Researchers==
 
  '''Applies to:''' UCSB faculty, post-docs, graduate students, undergraduates, interns etc.
 
  '''Applies to:''' UCSB faculty, post-docs, graduate students, undergraduates, interns etc.
* Contact the [[Brian Thibeault|Lab Director, Brian Thibeault]] for lab access.
 
  
== Industry and non-U.C. Academic Institutions ==
+
*Contact the [[Brian Thibeault|Lab Director, Brian Thibeault]] for lab access.
 +
 
 +
==Industry and non-U.C. Academic Institutions==
 
  '''Applies to:''' Employees of Companies (for-profit), and researchers from Universities/Academic Institutions that are not part for the University of California system. This includes Government research labs in any country.
 
  '''Applies to:''' Employees of Companies (for-profit), and researchers from Universities/Academic Institutions that are not part for the University of California system. This includes Government research labs in any country.
 
If you think your institution has previously sent people to use our lab, some of this paperwork may already be in place. Contact the [[Brian Thibeault|Lab Director]] to find out if that is the case.
 
If you think your institution has previously sent people to use our lab, some of this paperwork may already be in place. Contact the [[Brian Thibeault|Lab Director]] to find out if that is the case.
  
 
To gain access to the lab and perform the work yourself requires the following steps:
 
To gain access to the lab and perform the work yourself requires the following steps:
# Submit a Detailed [//wiki.nanotech.ucsb.edu/w/images/7/79/Nanofabrication_Facility_Project_Description.xlsx project description (download)] to the [[Brian Thibeault|Lab Director]].
 
# Nanofab staff acceptance
 
# Provide a General Liability Insurance Certificate
 
## Commercial Form General Liability requirements:
 
### Combined Single Limit per Occurrence: $1,000,000
 
### General Aggregate, Bodily Injury, Property Damage: $2,000,000
 
###  The ''Regents of the University of California'' must be named as an additional insured.
 
### The CERTIFICATE HOLDER shall be identified as follows:  
 
###: The Regents of the University of California
 
###: Contracts & Property Office
 
###: SAASB Bldg., Rm. 3203
 
###: University of California
 
###: Santa Barbara, CA 93106-2095
 
## [//wiki.nanotech.ucsb.edu/w/images/9/96/SampleCOI.pdf An example certificate is attached (download)].  Your certificate should have the same basic format and information as shown.
 
## The certificate should be emailed to the [[Brian Thibeault|Lab Director]].
 
# Provide Proof of Workers’ Compensation Insurance or equivalent coverage. This is required under California state law.
 
#: If the required certificate of insurance is not received and approved prior to the Facility User's intended use of facility, Facility User shall not be allowed to use University facilities.
 
# [//wiki.nanotech.ucsb.edu/w/images/e/ef/UCSB-Facilities-Use-Blanket-Waiver.pdf UCSB Blanket Liability Waiver (download)] signed by all actual lab users (attached form)
 
# [//wiki.nanotech.ucsb.edu/w/images/a/a2/UCSB-Facilities-Use-Agreement.pdf UCSB Facility Use Agreement (download)] signed by an official company signatory (attached form)
 
## [https://wiki.nanotech.ucsb.edu/w/images/7/7c/Attachment_A_-_UCSB_Master_Facilities_Use_Agreement_Labs.pdf Attachment A] - Lists UCSB facilities covered by the agreement.
 
# [https://www.ehs.ucsb.edu/training/uc-laboratory-safety-fundamentals-initial-online UCSB EH&S online safety course] - check with [[Brian Thibeault|Lab Director]] for requirements and access to the course.
 
# UCSB Nanofab orientation/training by the [[Brian Thibeault|lab manager]] with review of the lab policy which can be found at the following link: [[Lab Rules|NanoFab Lab Rules]]
 
  
== Other U.C. Campuses ==
+
#Submit a Detailed [//wiki.nanotech.ucsb.edu/w/images/7/79/Nanofabrication_Facility_Project_Description.xlsx project description (download)] to the [[Brian Thibeault|Lab Director]].
 +
#Nanofab staff acceptance
 +
#Provide a General Liability Insurance Certificate
 +
##Commercial Form General Liability requirements:
 +
###Combined Single Limit per Occurrence: $1,000,000
 +
###General Aggregate, Bodily Injury, Property Damage: $2,000,000
 +
### The ''Regents of the University of California'' must be named as an additional insured.
 +
###The CERTIFICATE HOLDER shall be identified as follows:  
 +
###:The Regents of the University of California
 +
###:Contracts & Property Office
 +
###:SAASB Bldg., Rm. 3203
 +
###:University of California
 +
###:Santa Barbara, CA 93106-2095
 +
##[//wiki.nanotech.ucsb.edu/w/images/9/96/SampleCOI.pdf An example certificate is attached (download)].  Your certificate should have the same basic format and information as shown.
 +
##The certificate should be emailed to the [[Brian Thibeault|Lab Director]].
 +
#Provide Proof of Workers’ Compensation Insurance or equivalent coverage. This is required under California state law.
 +
#:If the required certificate of insurance is not received and approved prior to the Facility User's intended use of facility, Facility User shall not be allowed to use University facilities.
 +
#[//wiki.nanotech.ucsb.edu/w/images/e/ef/UCSB-Facilities-Use-Blanket-Waiver.pdf UCSB Blanket Liability Waiver (download)] signed by all actual lab users (attached form)
 +
#[//wiki.nanotech.ucsb.edu/w/images/a/a2/UCSB-Facilities-Use-Agreement.pdf UCSB Facility Use Agreement (download)] signed by an official company signatory (attached form)
 +
##[https://wiki.nanotech.ucsb.edu/w/images/7/7c/Attachment_A_-_UCSB_Master_Facilities_Use_Agreement_Labs.pdf Attachment A] - Lists UCSB facilities covered by the agreement.
 +
#[https://www.ehs.ucsb.edu/training/uc-laboratory-safety-fundamentals-initial-online UCSB EH&S online safety course] - check with [[Brian Thibeault|Lab Director]] for requirements and access to the course.
 +
#UCSB Nanofab orientation/training by the [[Brian Thibeault|lab manager]] with review of the lab policy which can be found at the following link: [[Lab Rules|NanoFab Lab Rules]]
 +
 
 +
==Other U.C. Campuses==
 
  '''Applies To:''' Researchers at other University of California campuses, apart from U.C Santa Barbara.
 
  '''Applies To:''' Researchers at other University of California campuses, apart from U.C Santa Barbara.
 
To gain access to the lab and perform the work yourself requires the following steps:
 
To gain access to the lab and perform the work yourself requires the following steps:
# Submit a Detailed [//wiki.nanotech.ucsb.edu/w/images/7/79/Nanofabrication_Facility_Project_Description.xlsx project description (download)] to [[Mailto:nanofab-job-inquiry@ece.ucsb.edu|Demis D. John & Brian Thibeault]]
+
 
# Nanofab staff acceptance
+
#Submit a Detailed [//wiki.nanotech.ucsb.edu/w/images/7/79/Nanofabrication_Facility_Project_Description.xlsx project description (download)] to [Mailto:nanofab-job-inquiry@ece.ucsb.edu Demis D. John & Brian Thibeault]
# Signed [//wiki.nanotech.ucsb.edu/w/images/0/00/Facility-Use-MOU---Intercampus-UC-User.pdf Facilities Use - Memorandum of Understanding - Inter-UC Campus Use (download)]
+
#Nanofab staff acceptance
## [https://wiki.nanotech.ucsb.edu/w/images/7/7c/Attachment_A_-_UCSB_Master_Facilities_Use_Agreement_Labs.pdf Attachment A] - Lists UCSB facilities covered by the agreement.
+
#Signed [//wiki.nanotech.ucsb.edu/w/images/0/00/Facility-Use-MOU---Intercampus-UC-User.pdf Facilities Use - Memorandum of Understanding - Inter-UC Campus Use (download)]
# [https://www.ehs.ucsb.edu/training/uc-laboratory-safety-fundamentals-initial-online UCSB EH&S online safety course] - check with [[Brian Thibeault|Lab Director]] for requirements and access to the course.
+
 
# UCSB Nanofab orientation/training by the [[Brian Thibeault|lab director]] with review of the lab policy which can be found at the following link: [[Lab Rules|NanoFab Lab Rules]]
+
:::[https://wiki.nanotech.ucsb.edu/w/images/7/7c/Attachment_A_-_UCSB_Master_Facilities_Use_Agreement_Labs.pdf Attachment A] - Lists UCSB facilities covered by the agreement.
The Nanofab orientation is the last step before gaining access to the lab after all the paperwork is in order.  [[Orientation Questionairre|Please fill out the attached questionnaire and email the Lab Director]].  
+
 
 +
#[https://www.ehs.ucsb.edu/training/uc-laboratory-safety-fundamentals-initial-online UCSB EH&S online safety course] - check with [[Brian Thibeault|Lab Director]] for requirements and access to the course.
 +
#UCSB Nanofab orientation/training by the [[Brian Thibeault|lab director]] with review of the lab policy which can be found at the following link: [[Lab Rules|NanoFab Lab Rules]]
 +
 
 +
The Nanofab orientation is the last step before gaining access to the lab after all the paperwork is in order. The director will send you the necessary info at that step.
  
 
The orientation takes between 1-2 hours and is scheduled based on new user demand.  The orientation will explain actual lab use, equipment scheduling and trainings, discuss safety policy, enter users into the access system, tour the gowning room area and explain any questions about lab or tool use.  Please feel free to [[Brian Thibeault|call or email]] to discuss in more detail.
 
The orientation takes between 1-2 hours and is scheduled based on new user demand.  The orientation will explain actual lab use, equipment scheduling and trainings, discuss safety policy, enter users into the access system, tour the gowning room area and explain any questions about lab or tool use.  Please feel free to [[Brian Thibeault|call or email]] to discuss in more detail.
  
== Fabrication Services by NanoFab Staff ==
+
==Fabrication Services by NanoFab Staff==
''Perform '''fabrication services by NanoFab staff''', instead of your staff/employees entering our lab.''
+
''Perform '''fabrication services via NanoFab staff''', instead of your staff/employees entering our lab.''
 +
 
 +
===Important Info on Fabrication Services===
 +
 
 +
*[https://www.nanotech.ucsb.edu/services#comp-k3rx7hk4 '''Rates are listed here''']. We bill for both "''equipment use''" <u>plus</u> "''dedicated staff support''" time per hour.
 +
*You will work directly with [[Demis D. John|Demis]] or [[Staff List#Process Group|his staff]] to schedule the work, if the project is accepted.
 +
*Any project must first be accepted by our Project Scientists.
 +
*We have limited staff and are not a foundry, and we will only accept jobs that we are capable of performing with success.
 +
*There is '''''no guarantee''''' of research results or success in fabrication. We may also be able to suggest other ways to get your devices made in our lab if Staff use is not appropriate for your project.
 +
*You are billed as if your own employee were using the lab regardless of results.  We can provide only a rough estimate of time and cost.
 +
*You will be <u>billed for the Actual time and materials required during the job</u>, regardless of project outcome. We send out bills monthly, with payment expected as Net30; Credit card payments are accepted.
 +
*[[Frequently Asked Questions#Publications acknowledging the Nanofab|Publications Policy]] - fabrication executed by NanoFab Staff is typically significant "''intellectual contribution''". Acknowledgement of NanoFab use is required at minimum.
 +
 
 +
===Request Remote Fabrication Services===
 +
''Submitting jobs for "remote" fabrication services requires the following steps:''
 +
 
 +
1.   Contact us ([Mailto:nanofab-job-inquiry@ece.ucsb.edu?subject=Fab&#x20;Services&#x20;Inquiry email us]) to determine project feasibility or ask questions.
  
=== Important Info on Fabrication Services ===
+
2.   Nanofab Staff acceptance of project.
* Any project must first be accepted by our Project Scientists.
 
* Work will be billed at the above rates, including both "equipment use" plus "dedicated staff support" time per hour.
 
We have limited staff and are not a foundry, so we will only accept jobs that we are capable of performing with success.  
 
  
You are billed as if your own employee were using the lab regardless of results – we can provide only a rough estimate of time and cost. There is no guarantee of research results or success in fabrication. We may also be able to suggest other ways to get your devices made in our lab.  
+
====Paperwork for Fabrication Services====
 +
3.  Submit the [//wiki.nanotech.ucsb.edu/w/images/7/79/Nanofabrication_Facility_Project_Description.xlsx '''Project Info and Description Form'''] (download) to [Mailto:nanofab-job-inquiry@ece.ucsb.edu?subject=Fab&#x20;Services&#x20;Project&#x20;Description Demis D. John and Brian Thibeault]
  
You will be <u>billed for the Actual time and materials required during the job</u>, regardless of project outcome. We send out bills monthly, with payment expected as Net30; Credit card payments are accepted.
+
*No signatures required, only project info and contact info for internal billing purposes.
  
You will work directly with [[Demis D. John|Demis]] or [[Staff List#Process Group|his staff]] to schedule the work, if the project is accepted.
+
4.   Return the [//wiki.nanotech.ucsb.edu/w/images/1/1d/UCSB_Service_Agreement.pdf '''UCSB Service Agreement'''] (download)
  
=== Request Remote Fabrication Services ===
+
::[//wiki.nanotech.ucsb.edu/w/images/7/7c/Attachment_A_-_UCSB_Master_Facilities_Use_Agreement_Labs.pdf "Attachment A" for Service Agreement] - Lists all UCSB facilities covered by this agreement.
Submitting "remote" work requires the following three steps:
 
  
1.   Submit the [[Media:Nanofabrication Facility Project Description.xlsx|'''Project Info and Description Form''']] (download) to [Mailto:nanofab-job-inquiry@ece.ucsb.edu?subject=Fab&#x20;Services&#x20;Project&#x20;Description Demis D. John and Brian Thibeault]
+
*Requires signature from your institution (signature authority required)
* ''You may [Mailto:nanofab-job-inquiry@ece.ucsb.edu?subject=Fab&#x20;Services&#x20;Inquiry email us first] to determine feasibility or ask questions.''
 
2.   Nanofab Staff acceptance of project
 
  
3.   Return the [[Media:UCSB Service Agreement.pdf|'''UCSB Service Agreement''']] (download) signed by your institution (signature authority required)
+
*Only one agreement is needed per institution. Ask us to find out if your inst. already has one in place.
* – [[Media:Attachment A - UCSB Master Facilities Use Agreement Labs.pdf|Attachment A]] - Lists UCSB facilities covered by the agreement.
 
  
* Only one agreement is needed per institution. Ask us to find out if your inst. already has one in place.
+
*If you are a '''UCSB Group''', we ''don't'' need the service agreement. from you, only the '''''Project Info & Description Form''''' (above).
 +
*If you are a '''group from another UC''', we don't need the Service Agreement, instead we need a different form: [[Services#Other U.C. Campuses|The Inter-Campus MOU]] (here is [https://wiki.nanotech.ucsb.edu/w/images/7/7c/Attachment_A_-_UCSB_Master_Facilities_Use_Agreement_Labs.pdf Attachment A]).

Latest revision as of 10:20, 22 October 2021

Procedures and paperwork to get your students/employees into the NanoFab.

If you are looking for fabrication services by NanoFab staff, please see this section.

Please choose the appropriate section:

U.C. Santa Barbara Researchers

Applies to: UCSB faculty, post-docs, graduate students, undergraduates, interns etc.

Industry and non-U.C. Academic Institutions

Applies to: Employees of Companies (for-profit), and researchers from Universities/Academic Institutions that are not part for the University of California system. This includes Government research labs in any country.

If you think your institution has previously sent people to use our lab, some of this paperwork may already be in place. Contact the Lab Director to find out if that is the case.

To gain access to the lab and perform the work yourself requires the following steps:

  1. Submit a Detailed project description (download) to the Lab Director.
  2. Nanofab staff acceptance
  3. Provide a General Liability Insurance Certificate
    1. Commercial Form General Liability requirements:
      1. Combined Single Limit per Occurrence: $1,000,000
      2. General Aggregate, Bodily Injury, Property Damage: $2,000,000
      3.  The Regents of the University of California must be named as an additional insured.
      4. The CERTIFICATE HOLDER shall be identified as follows:  
        The Regents of the University of California
        Contracts & Property Office
        SAASB Bldg., Rm. 3203
        University of California
        Santa Barbara, CA 93106-2095
    2. An example certificate is attached (download).  Your certificate should have the same basic format and information as shown.
    3. The certificate should be emailed to the Lab Director.
  4. Provide Proof of Workers’ Compensation Insurance or equivalent coverage. This is required under California state law.
    If the required certificate of insurance is not received and approved prior to the Facility User's intended use of facility, Facility User shall not be allowed to use University facilities.
  5. UCSB Blanket Liability Waiver (download) signed by all actual lab users (attached form)
  6. UCSB Facility Use Agreement (download) signed by an official company signatory (attached form)
    1. Attachment A - Lists UCSB facilities covered by the agreement.
  7. UCSB EH&S online safety course - check with Lab Director for requirements and access to the course.
  8. UCSB Nanofab orientation/training by the lab manager with review of the lab policy which can be found at the following link: NanoFab Lab Rules

Other U.C. Campuses

Applies To: Researchers at other University of California campuses, apart from U.C Santa Barbara.

To gain access to the lab and perform the work yourself requires the following steps:

  1. Submit a Detailed project description (download) to Demis D. John & Brian Thibeault
  2. Nanofab staff acceptance
  3. Signed Facilities Use - Memorandum of Understanding - Inter-UC Campus Use (download)
Attachment A - Lists UCSB facilities covered by the agreement.
  1. UCSB EH&S online safety course - check with Lab Director for requirements and access to the course.
  2. UCSB Nanofab orientation/training by the lab director with review of the lab policy which can be found at the following link: NanoFab Lab Rules

The Nanofab orientation is the last step before gaining access to the lab after all the paperwork is in order. The director will send you the necessary info at that step.

The orientation takes between 1-2 hours and is scheduled based on new user demand.  The orientation will explain actual lab use, equipment scheduling and trainings, discuss safety policy, enter users into the access system, tour the gowning room area and explain any questions about lab or tool use.  Please feel free to call or email to discuss in more detail.

Fabrication Services by NanoFab Staff

Perform fabrication services via NanoFab staff, instead of your staff/employees entering our lab.

Important Info on Fabrication Services

  • Rates are listed here. We bill for both "equipment use" plus "dedicated staff support" time per hour.
  • You will work directly with Demis or his staff to schedule the work, if the project is accepted.
  • Any project must first be accepted by our Project Scientists.
  • We have limited staff and are not a foundry, and we will only accept jobs that we are capable of performing with success.
  • There is no guarantee of research results or success in fabrication. We may also be able to suggest other ways to get your devices made in our lab if Staff use is not appropriate for your project.
  • You are billed as if your own employee were using the lab regardless of results. We can provide only a rough estimate of time and cost.
  • You will be billed for the Actual time and materials required during the job, regardless of project outcome. We send out bills monthly, with payment expected as Net30; Credit card payments are accepted.
  • Publications Policy - fabrication executed by NanoFab Staff is typically significant "intellectual contribution". Acknowledgement of NanoFab use is required at minimum.

Request Remote Fabrication Services

Submitting jobs for "remote" fabrication services requires the following steps:

1.   Contact us (email us) to determine project feasibility or ask questions.

2.   Nanofab Staff acceptance of project.

Paperwork for Fabrication Services

3. Submit the Project Info and Description Form (download) to Demis D. John and Brian Thibeault

  • No signatures required, only project info and contact info for internal billing purposes.

4.   Return the UCSB Service Agreement (download)

"Attachment A" for Service Agreement - Lists all UCSB facilities covered by this agreement.
  • Requires signature from your institution (signature authority required)
  • Only one agreement is needed per institution. Ask us to find out if your inst. already has one in place.
  • If you are a UCSB Group, we don't need the service agreement. from you, only the Project Info & Description Form (above).
  • If you are a group from another UC, we don't need the Service Agreement, instead we need a different form: The Inter-Campus MOU (here is Attachment A).