Difference between revisions of "Oxford ICP Etcher - Process Control Data"

From UCSB Nanofab Wiki
Jump to navigation Jump to search
(link to dummy image)
m (added new data, also changed units from nm to um)
Line 7: Line 7:
 
|Date
  
|Date
 
|Sample#
  
|Sample#
−
|Etch Rate (nm/min)
 +
|Etch Rate (um/min)
 
|Etch Selectivity (InP/SiO2)
  
|Etch Selectivity (InP/SiO2)
 
|Comments
  
|Comments
Line 30: Line 30:
 
|Sample Size (dimensions, mm)
  
|Sample Size (dimensions, mm)
 
|Sample Size (area, mm<sup>2</sup>)
  
|Sample Size (area, mm<sup>2</sup>)
−
|Etch Rate (nm/min)
 +
|Etch Rate (um/min)
 
|Etch Selectivity (InP/SiO2)
  
|Etch Selectivity (InP/SiO2)
 
|Comments
  
|Comments
Line 75: Line 75:
 
|1/4 of 50mm wafer
  
|1/4 of 50mm wafer
 
|490
  
|490
  +
|0.428-0.46
−
|
  
  +
|428nm left
−
|
  
 
|<small>~30-40% SiO<sub>2</sub> masking (NingC's pattern)</small>
  
|<small>~30-40% SiO<sub>2</sub> masking (NingC's pattern)</small>
  +
|[https://wiki.nanotech.ucsb.edu/w/images/9/94/Oxford_Etch_InP_Cal_SEM_-_quarter_wafer_-_CS_005.jpg <nowiki>[1]</nowiki>]
−
|
  
 
|}
  
|}

Revision as of 12:10, 1 February 2022

Data - InP Ridge Etch (Oxford ICP Etcher)

PECVD SiO2 hardmask, patterned on Stepper #2 (AutoStep 200) & Panasonic ICP #1

InP Ridge Etch: 60°C, 3mT, 800W/65W, Cl2=18, H2=15, CH4=10sccm, time=5min00sec (300sec)

Sample Size: 1x1cm, ~30-40% SiO2 masking (NingC's pattern). Silicon carrier, no adhesive.

Date Sample# Etch Rate (um/min) Etch Selectivity (InP/SiO2) Comments SEM Images
1/26/22 NP_? testing link [1]

Dependence on Sample Size

We have found that the size of the InP piece loaded (no adhesive, onto Silicon carrier wafer) affects the etch rate, but does not affect the etch profile - ie. etches are still smooth and vertical, but rate varies with sample area.

InP Ridge Etch: 60°C, 3mT, 800W/65W, Cl2=18, H2=15, CH4=10sccm, time=5min05sec (305sec)

Silicon carrier, no adhesive.

Date Sample# Sample Size (dimensions, mm) Sample Size (area, mm2) Etch Rate (um/min) Etch Selectivity (InP/SiO2) Comments SEM Images
1/11/22 DJ_InPRidge 4.5 x 2.5 11.25 0.602 64.6nm left ~50% SiO2 masking (GCA Calibration pattern) [1]
1/12/22 DJ_InPRidge 4.5 x 3 13.5 0.563 76.4nm left ~50% SiO2 masking (GCA Calibration pattern) [2]
1/12/22 DJ_InP#3 4.5 x 3 13.5 0.612 71nm left ~50% SiO2 masking (GCA Calibration pattern) [3]
1/26/22 NP_? 10 x 10 100 ~30-40% SiO2 masking (NingC's pattern)
1/26/22 NP_? 1/4 of 50mm wafer 490 0.428-0.46 428nm left ~30-40% SiO2 masking (NingC's pattern) [1]
Retrieved from "https://wiki.nanofab.ucsb.edu/w/index.php?title=Oxford_ICP_Etcher_-_Process_Control_Data&oldid=159611"