Difference between revisions of "Oven 5 (Labline)"
Jump to navigation
Jump to search
| (9 intermediate revisions by the same user not shown) | |||
| Line 1: | Line 1: | ||
= About = |
= About = |
||
| + | The oven temperature can be controlled from 30C-200C with a user programable ramp rate between 0.1C-1.0C/min. Maximum temperature is 200C. There is a N2 purge to provide a dry intert atmosphere during use. |
||
| − | The Sharon is a cryo-pumped thin film evaporator with a Temescal four hearth 270° bent beam evaporation source. The system incorporates a Commonwealth Scientific Corp. ion source for in-situ sample cleaning. Fixturing in the Sharon will accept any size sample up to 3.5-inch diameter. In addition, a rotation fixture is easily installed which permits adjustable angle, 360° variable speed rotation of any size sample, up to 1.5-inch diameter. This feature is particularly useful for promoting step coverage of irregular surfaces. |
||
| − | |||
| − | The Sharon is used for the evaporation of high purity metals, e.a. Al, Au, Ni, Ge, AuGe, Ti, Pt etc., for interconnect and ohmic contact metalization for fabrication of III-V compound semiconductor and silicon device fabrication. |
||
| − | |||
| − | |||
=Documentation= |
=Documentation= |
||
| − | *[[ media: Watlow_982_controller.pdf|Operating Instructions]] |
+ | *[[ media: Watlow_982_controller.pdf|Operating Instructions: Chapter 7 is specific to Nanofab users]] |
| + | *[[ media: Oven5.pdf|Oven 5 Manual]] |
||
=Oven 5= |
=Oven 5= |
||
Revision as of 09:20, 17 March 2017
About
The oven temperature can be controlled from 30C-200C with a user programable ramp rate between 0.1C-1.0C/min. Maximum temperature is 200C. There is a N2 purge to provide a dry intert atmosphere during use.
Documentation
Oven 5
|
