Difference between revisions of "Direct-Write Lithography Recipes"

Revision as of 14:12, 9 October 2020

Work In Progress

This article is still under construction. It may contain factual errors. Content is subject to change.

Photolithography Recipes for the Heidelberg MLA150. Description of litho params- different lasers available, greyscale etc.

General notes: Hotplates used, filters, laser wavelengths, etc.

Resist	Spin Cond.	Bake	Thickness	Laser (nm)	Exposure Time\|	DeFocus	PEB	Developer	Developer Time	Comments
AZ4110	4 krpm/30s	95°C/60s	~ 1.1 µm	405	240	5	none	AZ400K:DI 1:4	50s	Used MLA design (good for isolated lines 0.8-1um)
AZ4330	4 krpm/30s	95°C/60s	~ 3.3 µm	405	320	6	none	AZ400K:DI 1:4	90s	Used MLA design
AZ4620
SPR 220-3.0	2.5 krpm/30s	115°C/90”	~ 2.7 µm	405			115°C/90s	AZ300MIF	60s
SPR 955-CM0.9	3 krpm/30s	95°C/60”	~ 0.9 µm	405			110°C/60s	AZ300MIF	60s
THMR-3600HP

General notes: Hotplates used, filters, laser wavelengths, etc.

Resist	Spin Cond.	Bake	Thickness	Laser (nm)	Flood	Developer	Developer Time	Comments
AZ5214	6 krpm/30s	95°C/60s	~ 1.0 µm	405	60"	AZ300MIF	60s	???
AZnLOF2020	3 krpm/30s	110°C/90s	~ 2.1µm	405	none	AZ300MIF	60s
SU-8 2075			~70µm	375				Extremely viscous. Pour into a wide-mouthed bottle, dispense directly from bottle. Replace napkin at end.

Description...

Resist	Spin Cond.	Bake	Thickness	Exposure Time	Focus Offset	PEB	Flood	Developer	Developer Time	Comments
AZ4620Z5214	?? krpm/30”	95°C/60”	?? µm				60"	AZ300MIF	60"	???

@@ Line 42: / Line 42: @@
 |~ 3.3 µm
 |405
-|
+|320
-|
+|6
 |''none''
 |AZ400K:DI 1:4
 |90s
+|Used MLA design
-|
 |-
 |[[:File:Az p4620 photoresist data package.pdf|AZ4620]]