Difference between revisions of "Dicing Saw (ADT)"
Jump to navigation
Jump to search
(→Operating Procedures: added "initial setup before cutting" link) |
(cut recipe recovery, pasting into own page) |
||
| Line 20: | Line 20: | ||
* [[ADT 7100 - Standard Dicing Procedure - Programmed Cut Map|Standard Dicing Procedure - Programmed Cut Map]] |
* [[ADT 7100 - Standard Dicing Procedure - Programmed Cut Map|Standard Dicing Procedure - Programmed Cut Map]] |
||
* [[ADT 7100 - Standard Dicing Procedure - Single Cuts|Standard Dicing Procedure - Single Cuts]] |
* [[ADT 7100 - Standard Dicing Procedure - Single Cuts|Standard Dicing Procedure - Single Cuts]] |
||
| + | * [[ADT 7100 - Recovering an Old Recipe (2019)|Recovering an Old Recipe]] |
||
| − | ==== [[Recipe Recovery Procedure]] ==== |
||
| − | # [[File:Image.png]]Click on the Programming Workspace |
||
| − | # Go to any recipe |
||
| − | # Click 'Recipe Import'[[File:Recipe import.png]] |
||
| − | # Select 'd: [New Volume]' from 'Folder List'[[File:Volume d.jpg|533x533px]] |
||
| − | # Open folder 'ADT'. Open Folder 'ADT-7100-8544150816'. Open folder 'db'. Open folder 'exports' |
||
| − | # Find you recipe in the box to the right and double click on it |
||
| − | # Verify group name is correct under 'Recipe Info' |
||
| − | # Click 'OK' |
||
| − | # Click 'Replace' |
||
| − | # Repeat for additional recipes |
||
== Recipes == |
== Recipes == |
||
Revision as of 03:13, 27 March 2019
|
About
The ADT 7100 Dicing Saw is optimized for multi-angle dicing of thin, tight tolerance products up to 200 mm x 200 mm. It is currently setup for dicing up to 8” diameter wafers. Check the Dicing Saw Recipes page for the blades we currently stock.
Detailed Specifications
Operating Procedures
- Setting up the Saw before Cutting
- Standard Dicing Procedure - Programmed Cut Map
- Standard Dicing Procedure - Single Cuts
- Recovering an Old Recipe
Recipes
- Packaging Recipes > Dicing Saw Recipes (ADT 7100)
Be sure to also see the methods for protecting your sample from dicing dust, and mounting/unmounting.