Difference between revisions of "Dicing Saw (ADT)"

From UCSB Nanofab Wiki
Jump to navigation Jump to search
(Text replacement - "www.nanotech.ucsb.edu/wiki/" to "wiki.nanotech.ucsb.edu/wiki/")
(14 intermediate revisions by 4 users not shown)
Line 1: Line 1:
−
{{tool|{{PAGENAME}}
 +
{{tool2|{{PAGENAME}}
 
|picture=ADT.jpg
  
|picture=ADT.jpg
 
|type = Packaging
  
|type = Packaging
−
|super= Aidan Hopkins
 +
|super= Lee Sawyer
  +
|super2= Aidan Hopkins
 
|location=Dicing Room: ESB 1147
  
|location=Dicing Room: ESB 1147
 
|description = ADT Dicing Saw
  
|description = ADT Dicing Saw
Line 10: Line 11:
 
|toolid=49
  
|toolid=49
 
}}
 
}}
−
== About ==
 +
==About==
−
The ADT 7100 Dicing Saw is optimized for multi-angle dicing of thin, tight tolerance products up to 200 mm x 200 mm. It is currently setup for dicing up to 8” diameter wafers. Check the [https://wiki.nanotech.ucsb.edu/wiki/index.php/Packaging_Recipes#Dicing_Saw_Recipes_.28ADT_7100.29 Dicing Saw Recipes page] for the blades we currently stock.
 +
The ADT 7100 Dicing Saw is optimized for multi-angle dicing of thin, tight tolerance products up to 200 mm x 200 mm. It is currently setup for dicing up to 8” diameter wafers. Check the [https://wiki.nanotech.ucsb.edu/w/index.php?title=Packaging_Recipes#Dicing_Saw_Recipes_.28ADT_7100.29 Dicing Saw Recipes page] for the blades we currently stock.
   
 
An ADT WM-966 tape applicator & Ultron Systems UH104-8 UV lamp system is used to apply UV-release tape for securing die during dicing.
  
An ADT WM-966 tape applicator & Ultron Systems UH104-8 UV lamp system is used to apply UV-release tape for securing die during dicing.
Line 17: Line 18:
 
Contact the tool supervisor for blades and dicing frames for your group.
  
Contact the tool supervisor for blades and dicing frames for your group.
   
−
== Detailed Specifications ==
 +
==Detailed Specifications==
   
  +
*Maximum Wafer Size: 8"
⚫
== Operating Procedures ==
  
  +
*Parts mounted to UV-release tape for cutting
−
* [[ADT 7100 - Initial Setup Before Cutting|Setting up the Saw before Cutting]]
  
  +
*Automated cut maps at multiple angles (0° and 90° typical)
−
* [[ADT 7100 - Standard Dicing Procedure - Programmed Cut Map|Standard Dicing Procedure - Programmed Cut Map]]
  
  +
*~few micron alignment to on-wafer features.
−
* [[ADT 7100 - Standard Dicing Procedure - Single Cuts|Standard Dicing Procedure - Single Cuts]]
  
  +
*Thermocarbon Resnoid dicing blades provided by staff
⚫
* [[ADT 7100 - Recovering an Old Recipe (2019)|Recovering an Old Recipe]]
  
   
  ⚫
==Operating Procedures==
   
  +
*[https://wiki.nanotech.ucsb.edu/w/images/8/80/ADT_SOP_Rev_F.pdf ADT Dicing Saw Standard Operating Procedure]
⚫
== Recipes ==
  
−
* Packaging Recipes > [https://wiki.nanotech.ucsb.edu/wiki/index.php/Packaging_Recipes?venotify=created#Dicing_Saw_Recipes_.28ADT_7100.29 Dicing Saw Recipes (ADT 7100)]
 +
*[https://wiki.nanotech.ucsb.edu/w/images/0/01/Tape_Station_SOP_Rev_A.pdf Tape Station Standard Operating Procedure]
  ⚫
*[[ADT 7100 - Recovering an Old Recipe (2019)|Recovering an Old Recipe]]
⚫
Be sure to also see the methods for protecting your sample from dicing dust, and mounting/unmounting.
  
  +
  +
  ⚫
==Recipes==
  +
  +
*Recipes > Packaging > '''[[Packaging Recipes#Dicing Saw Recipes .28ADT 7100.29|Dicing Saw Recipes (ADT 7100)]]'''
  +
  ⚫
Be sure to also see the recipes for protecting your sample from dicing dust, and mounting/unmounting.

Revision as of 11:16, 30 August 2022

Dicing Saw (ADT)
ADT.jpg
Location Dicing Room: ESB 1147
Tool Type Packaging
Manufacturer Advanced Dicing Technologies Ltd.
Model ADT 7100
Description ADT Dicing Saw
Primary Supervisor Lee Sawyer
(805) 893-2123
lee_sawyer@ucsb.edu

Secondary Supervisor

Aidan Hopkins

Recipes N/A
SignupMonkey: Sign up for this tool


About

The ADT 7100 Dicing Saw is optimized for multi-angle dicing of thin, tight tolerance products up to 200 mm x 200 mm. It is currently setup for dicing up to 8” diameter wafers. Check the Dicing Saw Recipes page for the blades we currently stock.

An ADT WM-966 tape applicator & Ultron Systems UH104-8 UV lamp system is used to apply UV-release tape for securing die during dicing.

Contact the tool supervisor for blades and dicing frames for your group.

Detailed Specifications

  • Maximum Wafer Size: 8"
  • Parts mounted to UV-release tape for cutting
  • Automated cut maps at multiple angles (0° and 90° typical)
  • ~few micron alignment to on-wafer features.
  • Thermocarbon Resnoid dicing blades provided by staff

Operating Procedures


Recipes

Be sure to also see the recipes for protecting your sample from dicing dust, and mounting/unmounting.

Retrieved from "https://wiki.nanofab.ucsb.edu/w/index.php?title=Dicing_Saw_(ADT)&oldid=160358"