Difference between revisions of "Dicing Saw (ADT)"

From UCSB Nanofab Wiki
Jump to navigation Jump to search
(Corrected staff info infobox, added model number, added tape applicator model number, linked to recipes page)
(Add tape station SOP)
(13 intermediate revisions by 4 users not shown)
Line 2: Line 2:
 
|picture=ADT.jpg
  
|picture=ADT.jpg
 
|type = Packaging
  
|type = Packaging
−
|super= Aidan Hopkins
 +
|super= Lee Sawyer
 
|location=Dicing Room: ESB 1147
  
|location=Dicing Room: ESB 1147
 
|description = ADT Dicing Saw
  
|description = ADT Dicing Saw
Line 10: Line 10:
 
|toolid=49
  
|toolid=49
 
}}
 
}}
−
== About ==
 +
==About==
−
The ADT 7100 Dicing Saw is optimized for multi-angle dicing of thin, tight tolerance products up to 200 mm x 200 mm. It is currently setup for dicing up to 8” diameter wafers. Check the [https://www.nanotech.ucsb.edu/wiki/index.php/Packaging_Recipes#Dicing_Saw_Recipes_.28ADT_7100.29 Dicing Saw Recipes page] for the blades we currently stock.
 +
The ADT 7100 Dicing Saw is optimized for multi-angle dicing of thin, tight tolerance products up to 200 mm x 200 mm. It is currently setup for dicing up to 8” diameter wafers. Check the [https://wiki.nanotech.ucsb.edu/w/index.php?title=Packaging_Recipes#Dicing_Saw_Recipes_.28ADT_7100.29 Dicing Saw Recipes page] for the blades we currently stock.
   
 
An ADT WM-966 tape applicator & Ultron Systems UH104-8 UV lamp system is used to apply UV-release tape for securing die during dicing.
  
An ADT WM-966 tape applicator & Ultron Systems UH104-8 UV lamp system is used to apply UV-release tape for securing die during dicing.
Line 17: Line 17:
 
Contact the tool supervisor for blades and dicing frames for your group.
  
Contact the tool supervisor for blades and dicing frames for your group.
   
−
== Detailed Specifications ==
 +
==Detailed Specifications==
   
  +
*Maximum Wafer Size: 8"
⚫
== Operating Procedures ==
  
  +
*Parts mounted to UV-release tape for cutting
−
* [[ADT 7100 - Initial Setup Before Cutting|Setting up the Saw before Cutting]]
  
  +
*Automated cut maps at multiple angles (0° and 90° typical)
−
* [[ADT 7100 - Standard Dicing Procedure - Programmed Cut Map|Standard Dicing Procedure - Programmed Cut Map]]
  
  +
*~few micron alignment to on-wafer features.
−
* [[ADT 7100 - Standard Dicing Procedure - Single Cuts|Standard Dicing Procedure - Single Cuts]]
  
  +
*Thermocarbon Resnoid dicing blades provided by staff
⚫
* [[ADT 7100 - Recovering an Old Recipe (2019)|Recovering an Old Recipe]]
  
   
  ⚫
==Operating Procedures==
   
  +
*[https://wiki.nanotech.ucsb.edu/w/images/1/11/ADT_SOP_Rev_E.pdf ADT Dicing Saw Standard Operating Procedure]
⚫
== Recipes ==
  
−
* Packaging Recipes > [https://www.nanotech.ucsb.edu/wiki/index.php/Packaging_Recipes?venotify=created#Dicing_Saw_Recipes_.28ADT_7100.29 Dicing Saw Recipes (ADT 7100)]
 +
*[https://wiki.nanotech.ucsb.edu/w/images/0/01/Tape_Station_SOP_Rev_A.pdf Tape Station Standard Operating Procedure]
  ⚫
*[[ADT 7100 - Recovering an Old Recipe (2019)|Recovering an Old Recipe]]
⚫
Be sure to also see the methods for protecting your sample from dicing dust, and mounting/unmounting.
  
  +
  +
  ⚫
==Recipes==
  +
  +
*Recipes > Packaging > '''[[Packaging Recipes#Dicing Saw Recipes .28ADT 7100.29|Dicing Saw Recipes (ADT 7100)]]'''
  +
  ⚫
Be sure to also see the recipes for protecting your sample from dicing dust, and mounting/unmounting.

Revision as of 11:02, 26 April 2022

Dicing Saw (ADT)
ADT.jpg
Tool Type Packaging
Location Dicing Room: ESB 1147
Supervisor Lee Sawyer
Supervisor Phone (805) 893-2123
Supervisor E-Mail lee_sawyer@ucsb.edu
Description ADT Dicing Saw
Manufacturer Advanced Dicing Technologies Ltd.
Model ADT 7100
Sign up for this tool


About

The ADT 7100 Dicing Saw is optimized for multi-angle dicing of thin, tight tolerance products up to 200 mm x 200 mm. It is currently setup for dicing up to 8” diameter wafers. Check the Dicing Saw Recipes page for the blades we currently stock.

An ADT WM-966 tape applicator & Ultron Systems UH104-8 UV lamp system is used to apply UV-release tape for securing die during dicing.

Contact the tool supervisor for blades and dicing frames for your group.

Detailed Specifications

  • Maximum Wafer Size: 8"
  • Parts mounted to UV-release tape for cutting
  • Automated cut maps at multiple angles (0° and 90° typical)
  • ~few micron alignment to on-wafer features.
  • Thermocarbon Resnoid dicing blades provided by staff

Operating Procedures


Recipes

Be sure to also see the recipes for protecting your sample from dicing dust, and mounting/unmounting.

Retrieved from "https://wiki.nanofab.ucsb.edu/w/index.php?title=Dicing_Saw_(ADT)&oldid=159830"