Difference between revisions of "Automated Coat/Develop System (S-Cubed Flexi)"

From UCSB Nanofab Wiki
Jump to navigation Jump to search
(added link to SOP)
 
(6 intermediate revisions by 3 users not shown)
Line 1: Line 1:
−
{{tool|{{PAGENAME}}
 +
{{tool2|{{PAGENAME}}
 
|picture=TBD.jpg
  
|picture=TBD.jpg
 
|super= Tony Bosch
  
|super= Tony Bosch
  +
|super2= Lee Sawyer
 
|location=Bay 7
  
|location=Bay 7
 
|description = Automatic Coat/Bake/Develop
  
|description = Automatic Coat/Bake/Develop
Line 11: Line 12:
 
|toolid=67
  
|toolid=67
 
}}
  
}}
  +
''This Tool is now available for training - please contact the supervisor. 2022-11-01''
⚫
'''THIS TOOL IS ONLY FOR STAFF USE AT THIS TIME.'''
  
   
−
=About=
 +
==About==
   
 
The S3-Coater is a Coater/Developer system that has one photoresist spinner, one developer spinner and 4 hotplates each with independent temperature control and a chill plate. A central robot picks your wafer/s from one of 2 cassettes, processes them and returns them to the cassette. The system is recipe driven with a high degree of process control and minimal backside contamination, and coats photoresists with low particle counts/streaks and high uniformity.
 
The S3-Coater is a Coater/Developer system that has one photoresist spinner, one developer spinner and 4 hotplates each with independent temperature control and a chill plate. A central robot picks your wafer/s from one of 2 cassettes, processes them and returns them to the cassette. The system is recipe driven with a high degree of process control and minimal backside contamination, and coats photoresists with low particle counts/streaks and high uniformity.
Line 19: Line 20:
 
At this time only full size substrates are allowed on this system. The S3 Coater is still in process development and not open for general use.
  
At this time only full size substrates are allowed on this system. The S3 Coater is still in process development and not open for general use.
   
−
=Detailed Specifications=
 +
==Detailed Specifications==
   
 
*Wafer Size: 100mm (150mm possible but not set up)
  
*Wafer Size: 100mm (150mm possible but not set up)
Line 28: Line 29:
 
**UV6-0.8
  
**UV6-0.8
 
**DS-K101-304
  
**DS-K101-304
  ⚫
**PMMA - '''<u>NOT FOR PUBLIC USE AT THIS TIME</u>'''
−
**PMMA
  
  +
**PMGI SF11 - '''<u>NOT FOR GENERAL USE AT THIS TIME</u>'''
−
**PMGI SF11
  
  +
**PMGI SF5 - '''<u>NOT FOR GENERAL USE AT THIS TIME</u>'''
−
**PMGI SF5
  
 
*Solvents Available:
  
*Solvents Available:
−
**EBR100
 +
**EBR100 (wafer backside cleaning)
−
*Developers Available:
 +
*Developers Available:
  +
**AZ 300 MiF - '''<u>NOT FOR GENERAL USE AT THIS TIME</u>'''
−
**AZ 300 MiF
  
   
−
=Process Information=
 +
==Process Information==
   
 
*Recipe Page for S-Cubed Coater: [[Lithography Recipes#Automated%20Coat.2FDevelop%20System%20Recipes%20.28S-Cubed%20Flexi.29|Lithography Recipes > Automated Coat/Develop System Recipes (S-Cubed Flexi]])
  
*Recipe Page for S-Cubed Coater: [[Lithography Recipes#Automated%20Coat.2FDevelop%20System%20Recipes%20.28S-Cubed%20Flexi.29|Lithography Recipes > Automated Coat/Develop System Recipes (S-Cubed Flexi]])
−
*See the [https://wiki.nanotech.ucsb.edu/wiki/index.php/Lithography_Recipes#Chemicals_Stocked_.2B_Datasheets Photolith. Chemicals page] for info on the installed resists.
 +
*See the [https://wiki.nanotech.ucsb.edu/w/index.php?title=Lithography_Recipes#Chemicals_Stocked_.2B_Datasheets Photolith. Chemicals page] for info on the installed resists.
   
−
=Operating Procedures=
 +
==Operating Procedures==
   
 
*[[S-Cubed Flexi - Operating Procedure|Standard Operating Procedure]] - For running pre-written recipes only.
  
*[[S-Cubed Flexi - Operating Procedure|Standard Operating Procedure]] - For running pre-written recipes only.
  +
  +
==Recipes==
  +
  +
* '''Recipes > Lithography >''' [[Lithography Recipes#Automated Coat.2FDevelop System Recipes .28S-Cubed Flexi.29|'''<u>Automated Coater Recipes</u>''']] - See all available spin-coat recipes for this machine. Only Staff may edit/create recipes.

Latest revision as of 14:41, 8 November 2022

Automated Coat/Develop System (S-Cubed Flexi)
TBD.jpg
Location Bay 7
Tool Type Wet Processing
Manufacturer S-Cubed
Model Flexi (Custom)
Description Automatic Coat/Bake/Develop
Primary Supervisor Tony Bosch
(805) 893-3486
bosch@ece.ucsb.edu

Secondary Supervisor

Lee Sawyer

Recipes Wet Processing Recipes
SignupMonkey: Sign up for this tool 


This Tool is now available for training - please contact the supervisor. 2022-11-01

About

The S3-Coater is a Coater/Developer system that has one photoresist spinner, one developer spinner and 4 hotplates each with independent temperature control and a chill plate. A central robot picks your wafer/s from one of 2 cassettes, processes them and returns them to the cassette. The system is recipe driven with a high degree of process control and minimal backside contamination, and coats photoresists with low particle counts/streaks and high uniformity.

At this time only full size substrates are allowed on this system. The S3 Coater is still in process development and not open for general use.

Detailed Specifications

  • Wafer Size: 100mm (150mm possible but not set up)
  • PR Coating Properties:
    • Uniformity < 1.0%
    • < 100 particles on 100mm wafer
  • Photoresists/Underlayers Available:
    • UV6-0.8
    • DS-K101-304
    • PMMA - NOT FOR PUBLIC USE AT THIS TIME
    • PMGI SF11 - NOT FOR GENERAL USE AT THIS TIME
    • PMGI SF5 - NOT FOR GENERAL USE AT THIS TIME
  • Solvents Available:
    • EBR100 (wafer backside cleaning)
  • Developers Available:
    • AZ 300 MiF - NOT FOR GENERAL USE AT THIS TIME

Process Information

Operating Procedures

Recipes

  • Recipes > Lithography > Automated Coater Recipes - See all available spin-coat recipes for this machine. Only Staff may edit/create recipes.
Retrieved from "https://wiki.nanofab.ucsb.edu/w/index.php?title=Automated_Coat/Develop_System_(S-Cubed_Flexi)&oldid=160666"